Jeep Cherokee XJ Front Bumper
#1172
CF Veteran
Join Date: Jun 2010
Location: Hayward, CA
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
yeah, I would unbolt it and move the bumper around to find the holes, all cherokees were built (except apparently maybe yours) with the three steering box holes on either rail.
My top steering box bolt didnt quite line up along with another which is normal, they rarely do on something like this due to manufacturing tolerances. my biggest qualm was that the tubes for the prerunner bars didnt just need to be welded, they needed to be angle cut to sit on the bumper and the side bars needed to be notched which is IMO not as advertised. Not everyone who has a welder also has the ability to notch their tubes
My top steering box bolt didnt quite line up along with another which is normal, they rarely do on something like this due to manufacturing tolerances. my biggest qualm was that the tubes for the prerunner bars didnt just need to be welded, they needed to be angle cut to sit on the bumper and the side bars needed to be notched which is IMO not as advertised. Not everyone who has a welder also has the ability to notch their tubes
Last edited by Hoooper; 09-26-2011 at 12:22 PM.
#1174
Banned
Thread Starter
Join Date: Apr 2009
Location: Mt.Airy NC
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I tell everyone or try to that all my bars well need to be cut to fit, in my add on eBay you can see in the pic they are not cut should not be a problem to anyone all you need is a grinder with a cutoff wheel and and grinding wheel, thanks for everyones orders keep them coming in
#1175
Member
Join Date: Apr 2011
Location: Ringsted
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 L
hello sir, if your still in the buisness of making winch bumpers for the xj, im up for one. i need it shipped to denmark
i hope for reply
thank you
i hope for reply
thank you
#1177
i DO NOT have any factory mounting points anywhere near those bolt holes. WTF
#1179
CF Veteran
Join Date: Feb 2011
Location: Apple Valley, MN
Posts: 2,763
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0L
Originally Posted by xjmonkey
i DO NOT have any factory mounting points anywhere near those bolt holes. WTF
#1182
CF Veteran
Join Date: Feb 2011
Location: Apple Valley, MN
Posts: 2,763
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0L
Originally Posted by xjmonkey
look back a page
And to answer the question just by looking at the brackets it looks as if it need to come back like 2"
#1183
#1184
http://www.decodethis.com/Default.as...MT7849JT148591
^ according to this my jeep came with a 4 banger ^
http://www.jeepfan.com/tech/decoding...j-vin-numbers/
this one doesnt even list the 5th digit i have in my vin, 'T'
^ according to this my jeep came with a 4 banger ^
http://www.jeepfan.com/tech/decoding...j-vin-numbers/
this one doesnt even list the 5th digit i have in my vin, 'T'
Last edited by xjmonkey; 09-26-2011 at 06:33 PM.
#1185
CF Veteran
Join Date: Jan 2011
Location: Randoph ohio!
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0L
Leonard I Fed up! Its zach dude from ohio pm me about my bumper the pre runner bars I wanted higher I forget to tell u I don't want the side pieces bent I want them straight if that's possible thanks pm me somtime or txt or call u got my number I thinkk thanks