Frame stiffeners.
#1
Thread Starter
CF Veteran
Joined: Jan 2009
Posts: 1,703
Likes: 0
From: Utardiland
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
Frame stiffeners.
cheapest you'll find anywhere. made 3 1/6 plate and comes with enough to do both front and rear outside frame rails.
rear
these are a grind to fit, they are cut pretty exact but some grinding is required for install depending on bumper brackets and trac bar mount. . they go from the front bumper mounts to the lower control arm mount, and from spring hanger to spring hanger. they hang a hair below the frame rails so you can weld bottom plates on if you'd like.
200.00 shipped for the set of 4 plates. pm me if interested.
rear
these are a grind to fit, they are cut pretty exact but some grinding is required for install depending on bumper brackets and trac bar mount. . they go from the front bumper mounts to the lower control arm mount, and from spring hanger to spring hanger. they hang a hair below the frame rails so you can weld bottom plates on if you'd like.
200.00 shipped for the set of 4 plates. pm me if interested.
Last edited by jmaxj; 06-13-2012 at 11:18 AM.
#5
Thread Starter
CF Veteran
Joined: Jan 2009
Posts: 1,703
Likes: 0
From: Utardiland
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
Originally Posted by wildcat
any for midsection?
Originally Posted by wildcat
no. these strengthen and reinforce the the unibody "frame".
#7
Thread Starter
CF Veteran
Joined: Jan 2009
Posts: 1,703
Likes: 0
From: Utardiland
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
Better than what? Any good after market or custom bumper should have frame tie ins that will sit over these, or these can be tied into the bumper brackets with some trimming.
Trending Topics
#9
Thread Starter
CF Veteran
Joined: Jan 2009
Posts: 1,703
Likes: 0
From: Utardiland
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
These are already made, they were ones that were made for a couple others that backed out.
Why you needing something custom done to them?
Why you needing something custom done to them?
#10
CF Veteran
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
#14
Thread Starter
CF Veteran
Joined: Jan 2009
Posts: 1,703
Likes: 0
From: Utardiland
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
Originally Posted by Gee oh Dee
You should consider becoming a vendor. You could make decent money.