i just twisted the uni body on my 91 xj and now she is parts. still has an active title however, i didnt go through insurance.
i had big plans for it but now all of the parts i was going to be putting into it this winter have to go.
i have my entire driveline from engine to tranny. 4.0l HO, aw4 transmission, np242 tcase and dana 30 and 35 diffs. all with about 260 000 km on it. but everything was working
stock set of vativa all terrains. 5 of them all on rims. about 60% tread
i have a set of 5 31x10.5x15 savero M/T tires mounted and balanced on black allied rims with an offset of about an inch and a quarter. it might be an inch and a half i cant remember. they only saw a few miles from the tire place to my house then i took them off.
i also have a set of rustys 2 inch springs and a set of 2.5" lift shackles from iron man offroad that have never been used. i had made the lift to fit the tires.

i also have two fuel rails. one with a set of ford #19 injectors and a fpr out of another engine (i forget the serial number) i was running it in my jeep. really smooth idle and increased my gas mileage too. the injectors were new when i bought them. and i have a second fuel rail with a hesco adjustable fpr and ford #24 injectors. also new. open to offers

i also have a 4.0l HO engine with about $2000 worth of machining into it and another $1500 of parts in it. never been fired.
.30 over bore with new pistons to match, re ground crank and rebalanced to fit rods, all new bearings and seals in the low end and high flow oil pump, head was decked down and had the valve seats re machined to fit new valves. head was also rebuilt. hesco high flow water pump and thermo stat, new alternator. there is probobly more im fogetting to list. i have all the reciepts as proof.
i want $2000 for the engine but i am very flexible on the price as i need to get rid of it

wont take less than $1000 for the set of five 31" tires. want $200 for the lift parts. but im open to any offers.

i live in calgary alberta canada, but if its parts you need its worth the drive for the price.

 

interested in the lift springs and schakles would they work with stock shocks

 

Do u have pic of the motor I might come get it

 

the shackles and spring would work with stock shocks ya. but it would be obviously better if you got shocks ment to handle a few inches of extra lift.
ill post a picture of the motor. i enameled it all black. made the oild pan valve cover and vibration dampener red... because i thought it would look cool.

 

any questions on its parts just ask

 

Pic of grille?

 

the grille broke in half when the front of my jeep smashed a concrete barrier

 

you have the fan shroud still??

 

no i havent used a fan shroud for three years. never really struck me as neccesary.

 

$40 on that Hesco fpr?

 

im selling it with the #24 injectors. ill take $200

 

Not interested in the injectors, but thank you for the reply. Glws

 

i posted one.

 

Are you wiling to ship? If so how much for wheels and tires to va 24333

 

considering how heavy the tires are, it would cost significantly more than the cost of gas to drive here and get it i think.