country2

Looking for the bolts that goes on the front seat belts for a 2000 jeep Cherokee 4 door. This is the "lower" bolt think torx size is a t50 ..I need two of them. Thanks

Ralph77

I think I can help with that. Are you talking about the bolt that is attached to the seat frame to hold the short female part of the seat belt that is next to the console for passenger and driver's?
If so have to give me a bit to sort through my spare parts and see if I can find them.

Ralph77

Just occurred to me if we are talking about the same bolts there is a white nylon washer and a little clip there too. I think. Will you be needing those?

country2

Nope its the ones for the shoulder belts that fastens to the door side almost on the floor on that strip between the front/rear doors.

Ralph77

Can't help you with that one. And I looked in my '00 parts catalog to see if by some chance they are were the same. They are not.
Thinking that the part number is 6036294AA. If so looks discontinued.
Sorry.

country2

Yea I have looked high and low and all I've found is one from a Grand Cherokee but it looks to be a T50 so it may work but hell they want over 10 dollars for it. Mine the heads are rounded had to use a pair of vice grips and a hammer to remove. Might see if I can figure the threads size and grade and convert to a hex head bolts.

Ralph77

Sometimes in my parts catalogs they do list a size. In my '00 they did not. But after I read what you wrote I checked some of my other ones. I came up with a completely different part # in my '97 to '99 one. 6034384. With a size listed. .437-20x1.15

So now I am all confused but then I did find this:

https://www.factorychryslerparts.com...6036187AA.html

Looks like these are available but I am not going to lie. I am really confused. I am not even sure if I am looking at the right part.

country2

lol...thats the bolt #2 on the list.