1 inch spacers??
#1
Member
Thread Starter
Join Date: Nov 2007
Location: lakewood, Colorado
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
1 inch spacers??
Im looking to add an inch or two more to my jeep. right now im running 3 inch rough country with 31's. any one recommend a spacer? im planning on doing a bastard pack in the back.
#2
Registered User
Any spacer will do the trick, just find one you like and call it a day. Personally I like the RE spacers but there isnt a whole lot that companies can do to differ spacers.
#4
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 19 Likes
on
13 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Never installed the RE spacers I've got they are riding around in my spare parts box. Haven't felt they were needed yet. Don't have any rubbing and very little sag in the front yet. But I got 'em when the time comes.
#5
Member
Thread Starter
Join Date: Nov 2007
Location: lakewood, Colorado
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
.my lift is a little bit under 3 inches and am looking just for a little more clearence. then after that all my money will be into SYE. with the bastard pack you can combine the springs in the disired order to get the right hight right? and ill look at the spacers....thanks guys. do you guys recommend doing a spacer though. any downside? i know my shocks are long enough!
#6
Member
Thread Starter
Join Date: Nov 2007
Location: lakewood, Colorado
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
can you even do rear spacers on a cherokee and do you recommend them.
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
#7
Registered User
can you even do rear spacers on a cherokee and do you recommend them.
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
Trending Topics
#8
Member
Thread Starter
Join Date: Nov 2007
Location: lakewood, Colorado
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
thats exactly what i thought. thanks ill do the bastard pack in the back and spacers up front.
thanks CF,
Brian
thanks CF,
Brian
#9
Registered User
#11
Old Skewl CF like a Sir
Join Date: Feb 2008
Location: Fort Myers, FL
Posts: 4,355
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L High Output OBDII
I'm running what a few people here and You are running -
Base lift was a 3" Rough Country
added - 2" Teraflex Shackles
and 2" Rubicon Express coil spacers.
Also removed stock flairs and chopped the fenders. Wow.
Base lift was a 3" Rough Country
added - 2" Teraflex Shackles
and 2" Rubicon Express coil spacers.
Also removed stock flairs and chopped the fenders. Wow.
#12
Member
Thread Starter
Join Date: Nov 2007
Location: lakewood, Colorado
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
yeah im also planning on doing some minor fender trimming to fit 32" tires. would it be safe to run 33's on this axle......its a 96 so what spline is it?
#13
Senior Member
Join Date: Mar 2008
Location: British Columbia, Canada
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Grand Cherokee
Engine: 4.7L V8
#15
Registered User