1989 Jeep is pxxxin me off!!!!!!
#1
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
1989 Jeep is pxxxin me off!!!!!!
Ok, new cps, new alternator, new coil, checked all power coming outta every wire, seems to check out correct. It looks to have had a ecu installed in it fairly recently along with the cps updated wiring harness. It cranks over just fine, just no spark. Can the cradle that the coil sits in give me these issues. Please help, just about ready to roll it off a cliff and never look back.
Last edited by silkwood; 12-06-2008 at 01:54 PM. Reason: forgot model of it
#4
CF Veteran
Join Date: Aug 2008
Location: palm desert,ca
Posts: 1,313
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: 4.0
slowwwwwwwwwwww down. this should be easy. you checked to see if the coil is getting voltage, correct? and there is nothing coming out of the coil wire? im confused, hook me up with some info.
#5
Member
Join Date: Oct 2008
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89
Model: Cherokee
Engine: 4.0L
sounds like your on the right path... w/o spark? it start at the plugs.. check the coil, than if the coil isnt putting out enough its probably a bad ground
#6
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 19 Likes
on
13 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Roll it off a cliff in my direction. Renix would be easy to trace. What kind of numers are you getting on the CPS?
https://www.cherokeeforum.com/f51/testing-cps-5563/
https://www.cherokeeforum.com/f51/testing-cps-5563/
Trending Topics
#10
CF Veteran
Join Date: Aug 2008
Location: palm desert,ca
Posts: 1,313
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: 4.0
Roll it off a cliff in my direction. Renix would be easy to trace. What kind of numers are you getting on the CPS?
https://www.cherokeeforum.com/showthread.php?t=5563
https://www.cherokeeforum.com/showthread.php?t=5563
#12
my 89 has been getting this problem once in awhile... i think its due to the distributer rotor and over corrosion on the connections. when i bought mine there was a old rotor in the middle console and one time when mine didn;t start i opened up the distributer steel wooled the connections and bammo it started just fine... not sure if this is what you got but with not spark this was my problem