Originally Posted by cruiser54

Eliminate the Heater Control Valve.

HCV Removal

Well, you guys ponder all you want.

The heat is controlled by the blend air door. I've eliminated at least 10 of them here in Arizona and my AC always works perfectly.

Let's not have this thread turn into one of those where folks think theory and conjecture trumps actual field experience which has been proven time and time again, by numerous different people.

It flat works. Period.

I've already stated the other benefits of keeping coolant flowing versus being stagnant in the heater core and the dangers/disastrous results of having one fail unexpectedly whether you're poking around the engine bay or driving down the highway or trail.


One thing you may want to consider, is removing/eliminating the heater control valve, if you haven't already. '96 down have the HCV, '97 up the Factory eliminated it.

During the warm months, with a HCV, (temp lever/**** never moved off cold) coolant sits and stagnates inside the heater core.....There's no fresh coolant/corrosion protection circulation through the heater core.

With the HCV removed/eliminated, coolant/corrosion protection flows through the heater core constantly when the motor is running, regardless of where the temp lever/**** is set.

Also, you don't have to remember to turn/slide the heat lever/**** when flushing/re-filling the cooling system because coolant is flowing to/through the heater core when the motor is running and the HCV is absent.

Be sure to plug/cap the small vacuum hose when eliminating the HCV.

Originally Posted by xj In AR

Does heater still work properly? You said ac works but no mention of heater functions.