Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

1996 Jeep Cherokee Sputtering while Accelerating

Thread Tools
 
Search this Thread
 
Old 06-30-2015 | 07:23 PM
  #16  
Ryguy9795's Avatar
Thread Starter
Newbie
 
Joined: Jun 2015
Posts: 20
Likes: 0
Model: Cherokee
Default

Ok so did a tune up and everything and it's now getting worse as it is backfiring a little bit. I'll turn it off and restart it and it will be fine. I'm running out of ideas. I didn't change tps yet but don't know if I should at this point. EDIT My pressure is dropping ALOT it went from 43 to 10. So I don't think it's the tps.

Last edited by Ryguy9795; 06-30-2015 at 07:40 PM.
Old 06-30-2015 | 08:35 PM
  #17  
cruiser54's Avatar
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,566
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by Ryguy9795
Ok so did a tune up and everything and it's now getting worse as it is backfiring a little bit. I'll turn it off and restart it and it will be fine. I'm running out of ideas. I didn't change tps yet but don't know if I should at this point. EDIT My pressure is dropping ALOT it went from 43 to 10. So I don't think it's the tps.
You have a fuel delivery problem....
Old 06-30-2015 | 08:50 PM
  #18  
Ryguy9795's Avatar
Thread Starter
Newbie
 
Joined: Jun 2015
Posts: 20
Likes: 0
Model: Cherokee
Default

Originally Posted by cruiser54
You have a fuel delivery problem....
It has to be cause I can only starr the car when I prime the fuel pressure. (Cycle it 3 times). But it is a Bosch Pump and it's only been 5 months. Is it possible that when I pit seafoam in a while back that it could have gumed it up? Or just a dud.
Old 06-30-2015 | 09:31 PM
  #19  
cruiser54's Avatar
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,566
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

Could be something as simple as the hose inside the tank from the pump slipped partly off, split etc...
Attached Images  
Old 07-01-2015 | 07:16 PM
  #20  
Ryguy9795's Avatar
Thread Starter
Newbie
 
Joined: Jun 2015
Posts: 20
Likes: 0
Model: Cherokee
Default

Originally Posted by cruiser54
Could be something as simple as the hose inside the tank from the pump slipped partly off, split etc...
Well it doesn't seem to be that. So I guess it has to be the pump. Anyone know of a place I can get a replacement pump with the assembly. My jeep is a split year so the fuel pressure regulator is on the assembly as well as the pump and send8ng unit.
Old 07-02-2015 | 12:56 PM
  #21  
Ryguy9795's Avatar
Thread Starter
Newbie
 
Joined: Jun 2015
Posts: 20
Likes: 0
Model: Cherokee
Default

Originally Posted by Ryguy9795
Well it doesn't seem to be that. So I guess it has to be the pump. Anyone know of a place I can get a replacement pump with the assembly. My jeep is a split year so the fuel pressure regulator is on the assembly as well as the pump and send8ng unit.
Ok so apparently there's no where I can find the whole unit. Only one I found is made by crown but it says it doesn't have the pressure sensor included. I'm guessing they mean the fuel pressure regulator in that regards. But if you look at the picture it looks like it has the housing for it.

http://www.quadratec.com/products/51...FZKRHwod6HIAAw

Last edited by Ryguy9795; 07-02-2015 at 01:02 PM.
Old 07-03-2015 | 12:03 PM
  #22  
OldTires's Avatar
Senior Member
 
Joined: Mar 2014
Posts: 952
Likes: 55
From: Eastern Long Island, NY
Year: 1996
Model: Cherokee
Engine: I6 Cyl / 4L
Wink

Originally Posted by Ryguy9795
Ok so apparently there's no where I can find the whole unit. Only one I found is made by crown but it says it doesn't have the pressure sensor included. I'm guessing they mean the fuel pressure regulator in that regards. But if you look at the picture it looks like it has the housing for it.

http://www.quadratec.com/products/51...FZKRHwod6HIAAw
that is the sending unit with the pressure regulator built in. it is the white plastic part on top of the fuel pump. if the sending unit is giving you issues, and you are sure this is the part for your Jeep, this unit just goes in the tank like the original. nothing more.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LiamLikeNeeson
Jeep Builds
18
01-01-2024 03:25 AM
jwolfuo
Introductions
12
03-09-2020 08:33 PM
IB Nolan
Announcements
4
09-08-2015 05:25 PM
BigDaveyL
Introductions
3
09-04-2015 03:14 PM
mjcxking
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
08-23-2015 08:55 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:31 PM.