2 inch lift

Reply Subscribe

Thread Tools

Search this Thread

01-01-2011 | 08:36 AM

#16

91_Cherokee

Junior Member

Joined: Nov 2010

Posts: 86

Likes: 0

From: Gladys, Va

Year: 1991

Model: Cherokee

Engine: 4.0

Quote:

Originally Posted by ken72

I had to cut a bolt off with a dremel and cutting wheel. Do yourself a favor and get a breaker bar. I think your lug wrench fits the bolts so you could try that if you dont have a breaker bar. It will take a lot of effort but they will break loose.

X2 on the breaker bar, and also a short piece of pipe to use for leverage. And make sure you have the right size sockets.

The bolts will be tight.

Reply Like

01-01-2011 | 11:14 AM

#17

clockwise

Senior Member

Joined: Aug 2009

Posts: 674

Likes: 0

From: McCall Idaho!

Year: 97

Model: Grand Cherokee

Engine: 5.2

For some reason 2 inch just doesnt do it :P you always want more

Reply Like

01-01-2011 | 12:22 PM

#18

AlcoaXJ

Newbie

Joined: Jan 2010

Posts: 13

Likes: 0

From: Greenback

Year: 1999

Model: Cherokee

Engine: 4.0L

Not sure about the fat bobs kit. I went with the rocky road outfitters 3" spacer kit. Sorry to say I have not put it on yet (waiting on wheels and tires to come in). It seems to be very high quality.

Good luck on the install.

Reply Like

01-01-2011 | 01:37 PM

#19

HeepJeeper

Member

Joined: Aug 2010

Posts: 190

Likes: 1

From: vermont

Year: 1996

Model: Cherokee

Engine: 4.0

I as well have a fat bobs lift for 2in shackle and spacer.
there all strong equipment no issues at all. i am very satisfied with what i got

Reply Like

01-01-2011 | 11:27 PM

#20

stockxj

Thread Starter

Junior Member

Joined: Sep 2010

Posts: 35

Likes: 0

From: havertown pa

Year: 1994

Model: Cherokee

Engine: 4.0 6 cyl

well guys this is great just realized i have to take the gf out to dinner for her b day on wens so it looks like the lift kit will have to wait till fridays paycheck

but maybe ill get some

haha thats awsome in the picture on fbg it looks like i get some hardware . what are the bolts for ? can i just cut the exsiting ones to speed up the process?