2 quick questions!!!!
#1
Junior Member
Thread Starter
Join Date: Jul 2010
Location: PORTLAND
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
2 quick questions!!!!
hey guys first thanks for all the help any time i have a question i always get a quick response...
first... i was replaceing my taillights and found i have 4 spaces for bulbs but only 3 recepticals other than the small 168 bulb there seems to have been some splicing in the wires but it looked like the PO had it wired for a trailer... anyone have a pic of the harness for the taillight or know the where each wire goes...
Second... i bought a new guage cluster from the JY and the temp guage seems to be dead is there any way to test the single guage?
here is a quick taste of the work i have done so far...
build thread to come soon
first... i was replaceing my taillights and found i have 4 spaces for bulbs but only 3 recepticals other than the small 168 bulb there seems to have been some splicing in the wires but it looked like the PO had it wired for a trailer... anyone have a pic of the harness for the taillight or know the where each wire goes...
Second... i bought a new guage cluster from the JY and the temp guage seems to be dead is there any way to test the single guage?
here is a quick taste of the work i have done so far...
build thread to come soon
#3
CF Veteran
Join Date: Jun 2010
Location: Flint/Asheville
Posts: 2,501
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
for the temp gauge you can remove it from the cluster, I know mine had cracks in the plastic where the 2 screws that held it there and completed the circuit. If its cracked you can replace it, i bought one off of ebay for $1 lol or from your other cluster.
of course check the sensor on the head.
of course check the sensor on the head.
#4
Junior Member
Thread Starter
Join Date: Jul 2010
Location: PORTLAND
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
for the temp gauge you can remove it from the cluster, I know mine had cracks in the plastic where the 2 screws that held it there and completed the circuit. If its cracked you can replace it, i bought one off of ebay for $1 lol or from your other cluster.
of course check the sensor on the head.
of course check the sensor on the head.
is there a way to test the sending unit to see if it even works there seemed to be some confussion by the guy at autozone as to which sensor i actually needed? or should i just get a new one JIC
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 08:16 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 07:50 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 05:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)