4wd inop
12-29-2010 | 11:55 AM
#1
Thread Starter
Junior Member
Joined: Dec 2010
Posts: 34
Likes: 0
From: duvall,wa
Year: 1987
Model: Cherokee
Engine: 4.0
4wd inop
last night my 4wd was working fine, i went out this morning and it doesnt work now, the 4wd light comes on but no power from the front axle, is any common issues i should look for? its currently snowing and would like to resolve this so i can get around...thank you, its a 87 cherokee chief with the 4.0 and 5 speed trans
12-29-2010 | 12:33 PM
#2
CF Veteran
Joined: Sep 2009
Posts: 8,567
Likes: 19
From: ☼ Blackhole Sun
Year: My Jeep is a GMC
12-29-2010 | 04:07 PM
#5
Thread Starter
Junior Member
Joined: Dec 2010
Posts: 34
Likes: 0
From: duvall,wa
Year: 1987
Model: Cherokee
Engine: 4.0
the central axle disconnect? is that everyone is "locking" in on the front diff by clamping it or flipping the bracket around? and all the vaccum lines looked in tact and ok
12-29-2010 | 04:41 PM
#6
Senior Member
Joined: Feb 2009
Posts: 717
Likes: 0
From: Highlands Ranch Co.
Year: 1985 shell
Model: Cherokee
Engine: 1996 6 cylinder Briggs & Stratton
The diaphragm cracks and wont hold the fork and collar over. Test it with a pump-- the switch is probably ok since you said the light comes on. Easy and cheap repair!!
12-29-2010 | 04:46 PM
#7
CF Veteran
Joined: May 2009
Posts: 10,280
Likes: 4
Year: 1996
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
10-04-2015 06:34 AM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-30-2015 11:14 PM
shadowmoses
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-30-2015 06:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)