4wd not disengaging/partially engaged

Reply Subscribe

Thread Tools

Search this Thread

12-20-2015 | 08:16 AM

#16

cruiser54

::CF Moderator::

Joined: Aug 2011

Posts: 43,971

Likes: 1,565

From: Prescott, Az

Year: 1990

Model: Cherokee (XJ)

Engine: 4.0

Quote:

Originally Posted by adamj

90 with np231 and CAD.
231 is better than the 242, right?

For some applications, yes.

I prefer the versatility of the 242 in that it can be left in Fulltime and forgotten about when the road conditions change from dry to slippery.

Reply Like

02-02-2016 | 12:59 PM

#17

adamj

Thread Starter

Junior Member

Joined: Jun 2014

Posts: 90

Likes: 1

From: Colorado

Year: 1990

Model: Cherokee

Engine: 4.0L

Update: the problem is the axle shaft u-joints, and it looks like I'll need to replace both sides.

Any tips for this job? Or anything else I can do while I have everything apart?

Reply Like

02-02-2016 | 01:06 PM

#18

toasterknight

CF Veteran

Joined: Jan 2015

Posts: 1,508

Likes: 5

From: Oregon Coast

Year: 1999

Model: Cherokee

Engine: 4.0L I6

Unit bearings might as well be done at the same time because you already have them out.

Reply Like

02-02-2016 | 02:23 PM

#19

adamj

Thread Starter

Junior Member

Joined: Jun 2014

Posts: 90

Likes: 1

From: Colorado

Year: 1990

Model: Cherokee

Engine: 4.0L

Good idea, they could use a re-packing, I don't think it's been done in a while.
What about the axle seals? Is this difficult to do?

Reply Like

02-02-2016 | 05:20 PM

#20

toasterknight

CF Veteran

Joined: Jan 2015

Posts: 1,508

Likes: 5

From: Oregon Coast

Year: 1999

Model: Cherokee

Engine: 4.0L I6

Quote:

Originally Posted by adamj

Good idea, they could use a re-packing, I don't think it's been done in a while.
What about the axle seals? Is this difficult to do?

Axle seal require removing the diff. You don't repack unit bearings. They are a sealed unit. Replace them if the are old of install them if its been done recently.

Reply Like