94 4.0 automatic Slipping out of 4H when going 20-30
#1
Member
Thread Starter
Join Date: Jun 2013
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
94 4.0 automatic Slipping out of 4H when going 20-30
Okay, so first time going 4h for a long period of time above 20mph. Basically, it'd drive fine, and then slip and start making the ratchet noise. I'd throw it in neutral, switch back to 2wd, back to 4H, and then it'd drive fine for a second, and then slip again.
Anyone know what would cause this?
Anyone know what would cause this?
#2
CF Veteran
There are several things that could cause this, listed from easiest to most difficult to remedy:
1. Misadjusted linkage
2. Change (coins) stuck in the lever under the console (I've actually seen this happen)
3. Bad engine/transmission mounts and or TC drop
4. Bent or broken shift fork in TC
5. Worn pads on TC shift fork.
6. Stretched TC chain which can flop around and strike the shift fork at higher speeds, causing it to disengage.
1. Misadjusted linkage
2. Change (coins) stuck in the lever under the console (I've actually seen this happen)
3. Bad engine/transmission mounts and or TC drop
4. Bent or broken shift fork in TC
5. Worn pads on TC shift fork.
6. Stretched TC chain which can flop around and strike the shift fork at higher speeds, causing it to disengage.
Thread
Thread Starter
Forum
Replies
Last Post
Girlski
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-15-2015 03:31 PM
Vegas101
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-04-2015 11:52 PM
carson
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 08:26 PM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 05:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)