96 and older cherokee cup holder
#76
Senior Member
Join Date: May 2012
Location: Fayetteville, NC
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
I had style A and did not like loosing my parking brake with a 5 speed at the time. So I adapted it to style B by trimming the bottom a little and using some self tapping drill screws in the top.
In my 86 Laredo, there are built in cup holders in the panels for the back seat.
In my 86 Laredo, there are built in cup holders in the panels for the back seat.
searching cupholder and found this amazing 4wd cupholder triangulator
#77
Junior Member
Join Date: Mar 2014
Location: Mid-Mich.
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
I've owned my XJ for almost 20 years, and it came with a cup holder that fits into slots on passenger side of console. I don't think I've ever used it, but I always kept it and it 's still hanging around in the inside of my jeep somewhere. I didn't know there was a different type available that actually screws into console. I thought at the time it was a pretty cheesy design but I got over it . A Cherokee comes with attitude adjustment built in.
#78
Newbie
Join Date: Jun 2014
Location: Marion Ohio
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
Anyone actually move the mirror switch to the ebrake style cupholder? Debating on cutting out that hole.....and wondering if it's not worth the hassle, as someone mentioned the power mirror switches wiring might be too short to transfer it...??? Also the console lid doesn't shut with the cupbholder screwed into place?
#79
I did move the switches forward! It was tight, but as long as the hole is properly cut what you can do is pull it out all the way, unplug it ( obviously ) push the new one into the cup holder, and before you mount the cup holder turn it and wiggle the connector back in from behind. Worked on my '92 perfectly, it was VERY close though.
#80
CF Veteran
Anyone actually move the mirror switch to the ebrake style cupholder? Debating on cutting out that hole.....and wondering if it's not worth the hassle, as someone mentioned the power mirror switches wiring might be too short to transfer it...??? Also the console lid doesn't shut with the cupbholder screwed into place?
Thread
Thread Starter
Forum
Replies
Last Post
max95xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-20-2017 09:16 PM
bfh_american
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
08-22-2015 12:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)