97 cherokee,check engine light
#1
Newbie
Thread Starter
Join Date: Sep 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
97 cherokee,check engine light
Hello, I hope someone can give me some info, my 97 Cherokee has a check engine light on. I went and had the codes run and it shows P0705 and p0700, all they told me is its a trans axle module or has a fault or failed range sensor. any help would be appreciated thank you
#2
CF Veteran
Join Date: Apr 2012
Location: Wisconsin
Posts: 5,302
Likes: 0
Received 20 Likes
on
17 Posts
Model: Cherokee
Neutral safety switch attached to the side of the transmission. ( it's the "range sensor"- senses which "range" you've put the shifter in: Reverse, Park, Drive, etc)
There are write-ups on cleaning and adjusting it, which normally takes care of the problem.
There are write-ups on cleaning and adjusting it, which normally takes care of the problem.
#4
CF Veteran
Join Date: Sep 2011
Location: Riviera, Texas
Posts: 4,172
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1998 Sport
Model: Cherokee
Engine: 4.0
Here's a good in detail write up on how to clean it.
http://www.bc4x4.com/tech/2010/jeep-...ty-switch-nss/
http://www.bc4x4.com/tech/2010/jeep-...ty-switch-nss/
Last edited by RTorrez1; 09-14-2013 at 02:40 PM.
#5
Member
Join Date: Sep 2013
Location: Colorado
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Here's a good in detail write up on how to lean it.
http://www.bc4x4.com/tech/2010/jeep-...ty-switch-nss/
http://www.bc4x4.com/tech/2010/jeep-...ty-switch-nss/
Thread
Thread Starter
Forum
Replies
Last Post
csmith237
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-24-2015 12:54 PM
Kevin Icenhour
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-21-2015 08:22 PM
Buddylove1991
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-20-2015 08:28 PM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)