After heater core install (dash token out) headlight switch won’t work
#1
Newbie
Thread Starter
Join Date: Apr 2017
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
After heater core install (dash token out) headlight switch won’t work
Hi everyone, I have a 1990 jeep cherokee (xj) wel anyway a month ago i did the heater core job and found out i didn’t have to remove the dash after I did the job. So of course I had to go through and unhook a bunch of wires. Well anyway my headlight aren’t working anymore with the switch that is but if I pull back on the blinker **** they come on. I have dash lights, gauges, and radio they all work just not the headlight switch. If you would think of any wires that aernt Hooked up that would help thanks.
#4
Member
Join Date: Sep 2017
Location: Seattle
Posts: 110
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4.0 Renix
There is a ground wire that comes down behind the panel where the hood release is. If that didnt get hooked back up it might creat your issue. Also, I have to do that same job. How did you find out you didnt have to pull the dash? Will the heater box come out without pulling the dash? thanks.
#5
Senior Member
Join Date: Jan 2015
Location: Anderson, SC
Posts: 641
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
There is a ground wire that comes down behind the panel where the hood release is. If that didnt get hooked back up it might creat your issue. Also, I have to do that same job. How did you find out you didnt have to pull the dash? Will the heater box come out without pulling the dash? thanks.
Worst yet all the Photobucket pictures don't work anymore and that's where most of the information is even if you do find a link.