air intake help
#1
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Virginia
Posts: 575
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 inline 6
air intake help
I been looking at cold air intakes but most of them are expensive and are not true cold air cause they are still sucking hot air off the manifold. i was wondering if could make a attachment on the front of my stock air box and run it some where for fresh cold air, any one who has done this or anyone with ideas?
#5
Newbie
Join Date: Dec 2009
Location: Iowa
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 I6
Hm.. You could do this with plumbing...
1. Use a hole saw to cut a hole in the top of the airbox.
2. Attach a pvc flange to said hole.
3. Glue a 10" piece of pvc pipe vertically to flange.
4. Drop hood.
5. Use hole saw (once) to cut out the metal where the dent was made.
6. Glue 90 degree elbow to vertical pipe, facing front for "force feed".
7. Paint with chrome hobby paint.
8. Purchase broom for swatting away hordes of beautiful impressed women.
1. Use a hole saw to cut a hole in the top of the airbox.
2. Attach a pvc flange to said hole.
3. Glue a 10" piece of pvc pipe vertically to flange.
4. Drop hood.
5. Use hole saw (once) to cut out the metal where the dent was made.
6. Glue 90 degree elbow to vertical pipe, facing front for "force feed".
7. Paint with chrome hobby paint.
8. Purchase broom for swatting away hordes of beautiful impressed women.
#6
CF Veteran
Join Date: Nov 2009
Location: The Republic of TEXAS
Posts: 8,172
Likes: 0
Received 15 Likes
on
15 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L HO
Just did a quick curiosity run. Ambient temp 48F, intake air temp 69F at steady 60 mph, according to the ScanGauge. I presume the hewdiwhapus circled is the IAT sensor so 69F air temp inside the metal intake runner doesn't seem too bad. Obviously the numbers will vary greatly with the changes in ambient temps, vehicle speed, stop-n-go driving, etc., etc. IMHO, the factory CAI seems to do a fairly good job.
#7
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Virginia
Posts: 575
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 inline 6
Hm.. You could do this with plumbing...
1. Use a hole saw to cut a hole in the top of the airbox.
2. Attach a pvc flange to said hole.
3. Glue a 10" piece of pvc pipe vertically to flange.
4. Drop hood.
5. Use hole saw (once) to cut out the metal where the dent was made.
6. Glue 90 degree elbow to vertical pipe, facing front for "force feed".
7. Paint with chrome hobby paint.
8. Purchase broom for swatting away hordes of beautiful impressed women.
1. Use a hole saw to cut a hole in the top of the airbox.
2. Attach a pvc flange to said hole.
3. Glue a 10" piece of pvc pipe vertically to flange.
4. Drop hood.
5. Use hole saw (once) to cut out the metal where the dent was made.
6. Glue 90 degree elbow to vertical pipe, facing front for "force feed".
7. Paint with chrome hobby paint.
8. Purchase broom for swatting away hordes of beautiful impressed women.
Trending Topics
#8
Newbie
Join Date: Dec 2009
Location: Iowa
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 I6
#9
Newbie
Join Date: Dec 2009
Location: Iowa
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 I6
This took a surprisingly long time to edit. But that's the best I can come up with. That's actually my car too, when I was going to sell it. The camera says '05, but it was actually summer '09.
Last edited by WhiteJeep93; 12-15-2009 at 10:59 PM.
#11
Well, since you're all of 30 minutes away from me hit me up whenever you need an extra hand to work on your Jeep...or need air tools/angle grinder
#12
Newbie
Join Date: Dec 2009
Location: Iowa
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 I6
Btw, I can be a bit sarcastic at times, so I hope it's understood that I wasn't honestly suggesting the pipe for a cold air mod
I'm more of the sleeper type. I prefer any and all mods to be 100% functional before showing, if possible. Lifts and tires are the obvious exception to this of course
I'm more of the sleeper type. I prefer any and all mods to be 100% functional before showing, if possible. Lifts and tires are the obvious exception to this of course
#14
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Virginia
Posts: 575
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 inline 6
Btw, I can be a bit sarcastic at times, so I hope it's understood that I wasn't honestly suggesting the pipe for a cold air mod
I'm more of the sleeper type. I prefer any and all mods to be 100% functional before showing, if possible. Lifts and tires are the obvious exception to this of course
I'm more of the sleeper type. I prefer any and all mods to be 100% functional before showing, if possible. Lifts and tires are the obvious exception to this of course
#15
"CF Moderator"
Join Date: Sep 2008
Location: N.J. Shore Area
Posts: 3,045
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: l6 HO
I been looking at cold air intakes but most of them are expensive and are not true cold air cause they are still sucking hot air off the manifold. i was wondering if could make a attachment on the front of my stock air box and run it some where for fresh cold air, any one who has done this or anyone with ideas?
Last edited by TrekkerJmm; 12-16-2009 at 02:48 PM.