Anyone Know what this is???
#1
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Ohio
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 I6
Anyone Know what this is???
What is the part that is rusted out???
Front Drivers side
1992 Jeep Cherokee Lerado 4.0 dana m 30 axle
#5
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 13 Likes
on
12 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Wow. If it hasnt fallen off yet you may be able to clean those flakes up with a wire brush and some patience.
Otherwise you'll probably need to find mounts from a donor axle. If the rest of the axle is like that too maybe just find a new one.
Otherwise you'll probably need to find mounts from a donor axle. If the rest of the axle is like that too maybe just find a new one.
#6
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 90 Likes
on
74 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
That mount is welded to the front axle tube. The front axle is toast.
Start looking for a replacement front axle assembly at the bone yard. Make sure the axle assembly is exactly the same as yours (except the rust).
Start looking for a replacement front axle assembly at the bone yard. Make sure the axle assembly is exactly the same as yours (except the rust).
Trending Topics
#8
CF Veteran
Join Date: Dec 2012
Location: York, PA
Posts: 4,169
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
maybe just that part of the axle is rusty? If the rest of it is in decent condition, you could clean it up and fab up a new shock mount and weld to it, and refinish it.
#10
CF Veteran
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
For some reason I'm thinking just ONE spot on that axle isn't bad.
Odds are the rest looks like that, or will very soon.
If he's a good welder maybe it'd be worth it. But that's alot of work when you should be able to get one for $100ish.
It doesn't have to be the same year, just make sure its geared the same. Most manuals were all the same, most autos were all the same. Pretty easy.
Odds are the rest looks like that, or will very soon.
If he's a good welder maybe it'd be worth it. But that's alot of work when you should be able to get one for $100ish.
It doesn't have to be the same year, just make sure its geared the same. Most manuals were all the same, most autos were all the same. Pretty easy.
#11
Here's a diagram of the assembly you're looking at...
http://www.wermopar.com/parts-catalo...ion-components
Should be able to look at that and figure out which part you need.
http://www.wermopar.com/parts-catalo...ion-components
Should be able to look at that and figure out which part you need.
#12
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 90 Likes
on
74 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Here's a diagram of the assembly you're looking at...
http://www.wermopar.com/parts-catalo...ion-components
Should be able to look at that and figure out which part you need.
http://www.wermopar.com/parts-catalo...ion-components
Should be able to look at that and figure out which part you need.