Xjmurphy13

Whatsup guys,

I got my xj with the aux fan in it and its never given me a problem. Then last night while I was driving home i saw my temp gauge overheat, pulled over , popped the hood. I messed with the ground for a second , rebolted it down, good to go. 10 minutes later I get gas and idle for 5 minutes and it stops again. Except this time im getting no spark or power on the ground, and the fan isnt starting. I pulled out the fan and the brittle wires were cut by the water pump i believe . Thats not the problem though. So i soon found out the fuse blew. I threw a 30 amp i had , and connected the wires by hand and nothing happened. Im very new to electrical, i moved the relay wires around which is probably dumb, but i put them back. Nothing is working and I overheat quick. I jumped the wires and the fan motor is still good. Any help is so greatly appreciated.

PS I am on my mac cause my phone is messed up, i may be able to take this outside for pictures let me know if needed & SORRY to double post didnt know where to put this

cruiser54

Thanks for your post.

We’re here to help, but you must understand that all Jeeps are not the same.
In order for us to give you more accurate advice and help, we must know the following, as applicable, along with detailed information as to the symptoms/problems etc:

Year
Model
Engine
Transmission
Transfer case