Haven't seen/found any info or write-ups of the mighty aw4 any questions, troubleshooting, and helpful tips go here

 

I cant find any shift kits for them kinda sucks.

 

There are shift kits but aren't really sought after since the aw4 is fine like it is. I can pm you link to shift kit if your still interested

 

i do like the aw4 tranny, but after having added a shift kit to a turbo400 in a truck i used to have i like how it stiffened up the shifts. what is the link? thanks

 

Has anyone rebuilt the aw4 and had to modify their aw4 valve body gaskets that came with a rebuild kit?

 

Anyone please post pics for the bolts to remove them from the jeep.

 

There are 6 bolts total on the bell housing 4 on transmission side 2 of which are reverse torx on top think its a E-12 then there are two on the engine side going through the inspection plate to the tranny there half inch hope that helps

 

Hell ya man that helped a ton. Thanks. Last question how many connections get disconnected ( doing a tranny swap and I dont wana miss a wire harness or a wire.) holding its all straight forward when I get under her.

 

should be two big connectors right under the tranny dipstick other then that not much besides the tv cable on the throttle linkage and it just snaps off then grab the other side that's going through the bracket with pliers and pull it through don't forget to disconnect the cps, main shift linkage, and pull out filler tube so it wont get bent think thats about it prolly forgetting something

 

Best pics i can find on the web.....thank you very very much!

This is gonna help me alot when i replace my flexplate.

Wish someone can do a write up on flexplate replacement.

 

yep no problem glad to help

 

Thanks again main. Lots of help.

 

*man

 

yep hit me up if ya have any more questions

 

Im sure there will be more.