Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

axel help...

Thread Tools
 
Search this Thread
 
Old 01-04-2010 | 08:34 PM
  #16  
shepW00dD's Avatar
Thread Starter
Seasoned Member
 
Joined: Oct 2009
Posts: 376
Likes: 0
From: Poconos PA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

same with the d30 for the front
Old 01-04-2010 | 08:38 PM
  #17  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 9
Model: Cherokee
Default

Originally Posted by shepW00dD
does it matter what year 8.25 rear i find will they all bolt up?

The 8.25 was used from 91-01 in the XJ. 91-96 models have the 27 spline axle shafts, and the 97-01s have the 29 spline shafts. The 29 spline is stronger and more desirable. Some very late production 96s were equipped with the 29 spline 8.25 when the factory ran out of 27s. So in a nutshell, any 8.25 from a 91-01 XJ is a direct bolt in. Any other 8.25 from any other Chrysler vehicle will require some modification and fab work for the spring perches to be in the correct position.
Old 01-04-2010 | 08:40 PM
  #18  
shepW00dD's Avatar
Thread Starter
Seasoned Member
 
Joined: Oct 2009
Posts: 376
Likes: 0
From: Poconos PA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

even with different gearing?
Old 01-04-2010 | 08:43 PM
  #19  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 9
Model: Cherokee
Default

Originally Posted by shepW00dD
same with the d30 for the front

Any D30 from any year XJ 84-01 will be a direct boly in swap. You have to watch out for the vacuum disconnect models that were used under "some but not all" XJs through 91. The MJ front D30 is also a direct swap. I believe the YJ Wrangler will also bolt in without mods, but someone with more knowledge will have to elaborate on that.
Old 01-04-2010 | 08:49 PM
  #20  
shepW00dD's Avatar
Thread Starter
Seasoned Member
 
Joined: Oct 2009
Posts: 376
Likes: 0
From: Poconos PA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

will abs be a problem if i have it?
Old 01-04-2010 | 08:56 PM
  #21  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 9
Model: Cherokee
Default

Originally Posted by shepW00dD
will abs be a problem if i have it?

Being that you are in PA and the state inspections require that all vehicle brake components function properly, then yes it would be a problem.
Old 01-04-2010 | 09:00 PM
  #22  
shepW00dD's Avatar
Thread Starter
Seasoned Member
 
Joined: Oct 2009
Posts: 376
Likes: 0
From: Poconos PA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

well how do i know if my jeep even has abs?
Old 01-04-2010 | 09:02 PM
  #23  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 9
Model: Cherokee
Default

Do you know what rear axle you currently have? D35 or 8.25?

Nevermind, I see by your previously posted pic that it is a 8.25. You do not have ABS, the 8.25 was never equipped with that option. Only the D35 was equipped with ABS but not all of them.

Last edited by winston427; 01-04-2010 at 09:05 PM.
Old 01-04-2010 | 09:06 PM
  #24  
shepW00dD's Avatar
Thread Starter
Seasoned Member
 
Joined: Oct 2009
Posts: 376
Likes: 0
From: Poconos PA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

the 8.25 with 3.07's in it
Old 01-04-2010 | 09:13 PM
  #25  
shepW00dD's Avatar
Thread Starter
Seasoned Member
 
Joined: Oct 2009
Posts: 376
Likes: 0
From: Poconos PA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

so if i pull any 8.25 and a front d30 off any jeep between 91-01 they will bolt right up?
Old 01-04-2010 | 09:15 PM
  #26  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 9
Model: Cherokee
Default

Originally Posted by shepW00dD
so if i pull any 8.25 and a front d30 off any jeep between 91-01 they will bolt right up?

That's a big hell yeah on any Cherokee.
Old 01-04-2010 | 09:18 PM
  #27  
shepW00dD's Avatar
Thread Starter
Seasoned Member
 
Joined: Oct 2009
Posts: 376
Likes: 0
From: Poconos PA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

good. that will end my searching for the most part. is there any way to tell what gears are in them just by lookin?
Old 01-04-2010 | 09:19 PM
  #28  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 9
Model: Cherokee
Default

The ID tag on ther rear axle will have the gear ratio on it.
Old 01-04-2010 | 09:21 PM
  #29  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 9
Model: Cherokee
Default

You can also use this guide to determine what it "should" be in the donor vehicle.


Gearing

3.07 - used with 4.0L engine / manual transmission
3.31 - only available on older (pre87?) 2 door XJs with "Fuel Economy" package
3.55 - used with 4.0L engine / automatic transmission
3.73 - found in some XJs with the towing package
4.10 - used with 2.5L engine usually, and older XJs with the "Off-Highway Vehicle" package.
Old 01-04-2010 | 09:21 PM
  #30  
shepW00dD's Avatar
Thread Starter
Seasoned Member
 
Joined: Oct 2009
Posts: 376
Likes: 0
From: Poconos PA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

awesome....going junkin tommorow!


Quick Reply: axel help...



All times are GMT -5. The time now is 04:38 PM.