ball joint replacement by owner
#31
MAYBE on a brand new Jeep you could replace a hub in half an hour. But on a Jeep with 12-25 years of settling, road salt, and other rust, I would like to see that accomplished. Especially for a shade tree mechanic who probably doesn't have hub pullers and other make-life-easy tools. I agree it is not a technically difficult job, but it is definitely time consuming, especially for a first timer.
#32
Senior Member
Join Date: Nov 2008
Location: south bend indiana
Posts: 958
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1993
Model: Cherokee(XJ)
Engine: 4.0 i six H.O.
i changed my ball joints in the begining of oct. i bought the hf kit and we had a hell of a time gettin the drivers sides out,bent the c-clamp and started smashing the cup thingys. i bought the extra adapter kit and it made it alot easier for passenger side. and used a breaker bar rachet with extra 2 foot pipe extension,oh yea broke the breaker bar too, also exchanged that . i can exchange the messed up kit for new one,not sure if u can for advance auto rental,maybe if you broke it then you gotta keep it? put the new moog zj steering gear on too. got it all together and realized i forgot i needed a new driver side hub bearing,sooo i got a timkin one for 90 bucks in one day. wouldve had it done in a half hour or less, but stupid rain kept coming down. i finished it the next day.
#33
Senior Member
i did my ball joints with a $30 press....did what most have posted, read the stu's write up and watched a couple youtubes....
be careful putting the axle shafts back in...i wrecked one of my inner axle seals
overall, easy peasy
and lol @ the exasperation at labor prices.
be careful putting the axle shafts back in...i wrecked one of my inner axle seals
overall, easy peasy
and lol @ the exasperation at labor prices.
#34
Seasoned Member
Join Date: Jul 2013
Location: Spokane Valley, WA
Posts: 432
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
I'll be finally doing mine at the end of this week. I got all four ball joints and the axles seals yesterday. Doing the seals at the same time because my right one is leaking a tad bit. I've got the ball joints out in the freezer in the garage and I'm getting a press from a mechanic buddy. I have Thursday and Friday off this week so it should give me plenty of time to do the work required without having to rush.
#35
Call the auto hobby shop and ask if they have the ball joint press in the shop. I know the one here in jersey has it as I did my ball joints there a few months back. They will help you and you will feel accomplished when done.
Thread
Thread Starter
Forum
Replies
Last Post
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-30-2015 05:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)