Blown head gasket or cracked head
#1
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Bama
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Blown head gasket or cracked head
Sup guys. New to the forum. My father in law just picked up a sweet 99 cherokee sport. Guy said it slung a rod. I tore into last night and found the following. First off no slung rod. The engine manually spins over fine. The block was full of coolant. Its an auto 4.0 4wd with only 133k miles on it. I am going to pull the head in the next few days. With this amount of coolant in the block, does this sound like a blown HG or cracked head? Thanks in advance.
#2
Senior Member
Join Date: Apr 2011
Location: Lansing, MI
Posts: 813
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
Tough to say, just inspect the head. Might as well just spend the money on a new and improved head while you've got it all apart. One empty wallet now will save an empty bank account later down the road.
#3
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Bama
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Yea thats what i was thinking. Ive been reading about the bad luck with the 0331 heads. Not sure if this one has it or not. Havnt checked that. I read where a few 99's had them.
#4
Senior Member
Join Date: Apr 2010
Location: Marshall, WI
Posts: 720
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0L i6
check the oil. if the head was cracked water would get into the oil, mixing, causing it to turn a redish murky tent, and would smell something horrible (happened with my Chevelle). Not saying this is the only means of checking, but it happened to me so thought I would share my 2 cents.
#5
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Bama
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Thats the first thing i checked. It read about half way up the dipstick. I dont know if he drove it for a while with a blown HG and it just accumulated that much, or if something went south and sucked all the coolant in at once.
#6
Senior Member
Join Date: Jun 2009
Location: West Texas
Posts: 553
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0 L
bring head to machine shop , have magnafluxed for cracks etc.
no cracks, have it tested for valve seal integrity, (leak down test?)
if all is well, then probly had a blown head gasket and PO didnt want to take time or money to fix.
if cracked, get new head. some pretty decent choices out there.
my 2 cents worth of drivel, an best of luck!
cpnwrench
Trending Topics
#8
CF Veteran
Join Date: Nov 2010
Location: In the middle of Minnesota!
Posts: 5,812
Received 104 Likes
on
92 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I haven't seen any actual proof of a 99 having the 0331 head, but all you have to do is look about halfway down on the drivers side of the head and the head number will show in the casting. My guess is that your 99 has the 0630 head.
#10
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Bama
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Well took the head off last night and found the problem. The second to last pushrod was bent. The back piston is missing! After i pulled the head and moved the intake and exhaust manifold over, i could see the big hole in the block. Dont see how that could have happened with the mileage that was on it. Guess i will be picking up the replacement engine today at a local junk yard. Found one out of a 99 2wd with 101k on it for $550.
Thread
Thread Starter
Forum
Replies
Last Post
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Silentj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-06-2015 08:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)