Brake burn smell front brakes
10-23-2021 | 04:59 AM
#16
CF Veteran
Joined: Jan 2017
Posts: 3,313
Likes: 377
From: Connecticut
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
IMO any type of welder will work. I used a 90 amp HFT wire feed and it worked fine. Disconnect battery before you weld, in theory you could fry the ECU.
10-23-2021 | 05:09 AM
#17
CF Veteran
Joined: Jan 2017
Posts: 3,313
Likes: 377
From: Connecticut
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Before you sink all that $$$ into welding stuff you need to find out what you have for electricity source. Small wire feed welders can be 110 VAC so you can use them anywhere. If you get a welder that needs 220 VAC you need a 220 VAC power source, maybe an adapter and extension cord which could cost as much as the welder itself.
10-23-2021 | 11:00 PM
#18
Thread Starter
Newbie
Joined: Sep 2021
Posts: 29
Likes: 1
Model: Cherokee (XJ)
Thread
Thread Starter
Forum
Replies
Last Post
centuryhouse
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
43
06-18-2015 09:27 PM
sr77
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-30-2012 10:17 AM
Marks2000XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
04-26-2011 05:42 PM
penguinmac
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
04-03-2010 08:27 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)