kstopp

Does anyone have a chart with the oil volume to add when individual A/C components are replaced? Example, I replaced my condenser, two lines, and the drier and want to add oil before recharging.

Saudade

I don't have a table but the FSM says:

"Refrigerant oil must be added when a receiver/drier, evaporator, condenser or compressor are replaced. When the compressor is replaced, the oil must be drained from the replaced compressor and measured. Drain all the oil from the new compressor. Add back into the new compressor the amount of oil that was drained out of the old compressor. Add an additional 30 ml (1 fluid oz.) of compressor oil to the system when a receiver-drier, condenser or evaporator is replaced."

So they way I read it, you need an ounce for the condenser and an ounce for the drier.

Perhaps someone else will chime in soon.

kstopp

Perfect, thanks!