Cam Issue 99 4.0 Cherokee
#1
Newbie
Thread Starter
Join Date: Dec 2018
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Cam Issue 99 4.0 Cherokee
I was rebuilding my lower end. Sent it to the machine shop and got all clearances correct. I get the motor home and start putting it back together. All was going well until I tried to put the thrust bolt in the cam. The bolt was too big for the inside of the cam. I know there was a change to the thrust plate in 99. I put a Mellon’s stock cam I believe it was the MC1377. My question is what is the fix for this issue? Do I have to get another cam or is there a bolt set up that does the same thing as the thrust bolt and holds the cam in place. Please let me know of some solutions or a solution. Any help would be greatly appreciated. I need to get this thing going so I can get the wife’s car back from my son.
Thread
Thread Starter
Forum
Replies
Last Post
82oldskid
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
06-30-2021 01:45 AM
LittleXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
11-11-2010 12:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)