CCV/PCV Question
#1
CCV/PCV Question
1992 4.0L....Does anyone have a source or an alternate part number for the OE CCV elbows? Dorman 47056 says it substitutes for the OE 53009241, but it doesn't look like what I have. And I'm having no luck with the other one. My rear elbow has an orifice, and the front one does not.
Last edited by TNMike; 09-27-2023 at 08:36 AM.
#3
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,565
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
ATTENTION ALL USER: Please read before posting!!!To all users of CF:
PLEASE, before posting technical questions, take some time to help others out, by adding details in the user control panel. There's 2 ways to do this. First, in the upper left corner on the front page of the site, is a menu button labeled UserCP.
After you click on that you'll see this menu:
Please take the time to click on the highlighted sections and fill out the vehicle information for your vehicle. The signature link is also helpful for any additional information like mods done, links to your build or other vehicles owned.
This helps EVERYONE out by informing them immediately about your year, make, model, etc.
These details are necessary for responders to accurately answer your questions without guessing or having to ask what are the specifics of the vehicle you are referring to. You can add these details easily and permanently by creating a signature or adding your truck details to your existing signature.
5 minutes of your time doing this now will save a ton of time and effort later.
Thanks!!!
CF staff
PLEASE, before posting technical questions, take some time to help others out, by adding details in the user control panel. There's 2 ways to do this. First, in the upper left corner on the front page of the site, is a menu button labeled UserCP.
After you click on that you'll see this menu:
Please take the time to click on the highlighted sections and fill out the vehicle information for your vehicle. The signature link is also helpful for any additional information like mods done, links to your build or other vehicles owned.
This helps EVERYONE out by informing them immediately about your year, make, model, etc.
These details are necessary for responders to accurately answer your questions without guessing or having to ask what are the specifics of the vehicle you are referring to. You can add these details easily and permanently by creating a signature or adding your truck details to your existing signature.
5 minutes of your time doing this now will save a ton of time and effort later.
Thanks!!!
CF staff
#6
CF Veteran
Joined: Aug 2020
Posts: 1,797
Likes: 482
From: SoCal
Year: 1988
Model: Cherokee (XJ)
Engine: 4.0L
Is it the lack of the orifice?
You have the right OE PN for the elbow with orifice. The Dorman part has no orifice so it's for the front vent that connects to the airbox.
You have the right OE PN for the elbow with orifice. The Dorman part has no orifice so it's for the front vent that connects to the airbox.
#7
Got a picture? I'm not sure the 1991-1993 had the orifice at the valve cover or the throttle body end of the line.
I'm wondering if what you really need is the 87-1990 grommet.
https://www.dormanproducts.com/p-7488-42088.aspx just the grommet
https://www.dormanproducts.com/p-2290-46005.aspx with the tube
I'm wondering if what you really need is the 87-1990 grommet.
https://www.dormanproducts.com/p-7488-42088.aspx just the grommet
https://www.dormanproducts.com/p-2290-46005.aspx with the tube
Thread
Thread Starter
Forum
Replies
Last Post
AlSpeciale
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-20-2020 05:47 PM
Romans715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-23-2018 10:40 PM
sethyyy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-19-2011 08:00 PM
96Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
02-25-2011 08:58 AM
chris_chevy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-21-2009 11:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)