Changed fuses now new issues
08-04-2012, 02:06 AM
#61
CF Veteran
Join Date: Nov 2010
Location: some small town oregon
Posts: 15,581
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by anothadayridin
Hey man if u have nothing. Nice to say don't. Say nothing. At all
Why all the punctuations? Forget how to type?
08-04-2012, 03:25 AM
#62
CF Veteran
Do you have any idea where the wire(s) that were wrapped around the fuse went? The PO (previous owner) had obviously installed a work-around for something... turn signals, maybe?
08-04-2012, 03:42 AM
#63
Newbie
Thread Starter
Join Date: Jul 2012
Location: Arizona
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
08-04-2012, 03:43 AM
#64
Newbie
Thread Starter
Join Date: Jul 2012
Location: Arizona
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Stop posting that. You have not been paying attention. It's all worked before she replaced a fuse for dash lights. A fuse would not tell the signal switch to gtfo. It's in the fuse block somewhere. I.e. flasher or **** poor connections in the fuse block. From the condition of the fuse posted earlier I can see water damage in the block.
So you gtfo with the combo switch. Don't you have $300 bucks to dig out of a heater vent?
So you gtfo with the combo switch. Don't you have $300 bucks to dig out of a heater vent?
08-04-2012, 03:53 AM
#65
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 29 Likes
on
28 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
thats what were trying to help you figure out exactly what is the fix .there can be numerous things wrong its not always the same fix on every xj . work with us its gotta be some thing simple if it worked b4 you messed with the fuses.....
08-04-2012, 03:57 AM
#66
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 29 Likes
on
28 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
I went and switched some fuses back to the old ones and my gauges are moving again. Still no turn signals. I have 2 other fuses that I didn't want to switch back. The one that is supposed to light up the dash (because that was my original issue) and the turn signals fuse. I didn't put the old fuse back for turn signals because when I pulled it out, there was all kinds of wire wrapped around on one side and I pulled them off. Also that side with the wire looks all white and almost like spiderwebs on the inside.
08-04-2012, 04:14 AM
#68
CF Veteran
08-04-2012, 04:19 AM
#70
CF Veteran
08-04-2012, 12:57 PM
#75
Newbie
Thread Starter
Join Date: Jul 2012
Location: Arizona
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee