Clarification - output / rear bushing transmission seal - drive shaft removal
#1
Member
Thread Starter
Join Date: Jan 2009
Location: USA
Posts: 130
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 / 6 EFI
Clarification - output / rear bushing transmission seal - drive shaft removal
Clarification - output / rear bushing transmission seal - drive shaft removal
I was following this write up. And searched many posts
http://go.jeep-xj.info/HowtoTCseal.htm
1. Are these the bolts to remove?
2. The guy mentions
" make sure that the cups don't fall off loosing the needle rollers. "
Can someone give me a little more background on what to look for when removing the shaft so that I do not have the cups fall off? And, any techniques that would be helpful.
I was following this write up. And searched many posts
http://go.jeep-xj.info/HowtoTCseal.htm
1. Are these the bolts to remove?
2. The guy mentions
" make sure that the cups don't fall off loosing the needle rollers. "
Can someone give me a little more background on what to look for when removing the shaft so that I do not have the cups fall off? And, any techniques that would be helpful.
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-30-2015 08:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)