Clutch/Transmission Problems
#16
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Pennsylvania
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Okay so I took the slave cylinder out and the piston was completely out of it. But from just looking from the outside in I'm not too sure of what to think. Here's some pictures
#17
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Pennsylvania
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Throw out bearing went bad. I'm pretty sure I need a new fork though. I don't want to go to a junk yard so any ideas? EBay?
#19
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Pennsylvania
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
#20
Newbie
Join Date: Jul 2011
Location: Morrisville, PA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
My slave rod is all the way out and I have the same grind you described. You said you had a bad throwout bearing which i guess is what mine has. Did you you have to replace the fork or anything like that to get it going again?
#21
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Pennsylvania
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
I ended up messing my tranny up before I could get anything back together. My fork wasn't in bad shape and I bought a new slave cylinder along with a new throw out bearing. I was hoping it would be the solution but never got the chance to put it back together
#22
Newbie
Join Date: Jul 2011
Location: Morrisville, PA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
damn what happened to it? I'm about to pull mine anywhere I need to be extra careful? Hit any major snags i need to be aware of?
#23
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Pennsylvania
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Well while it was in reverse I pushed the shifter into neutral and it stayed in reverse while the shifter is in neutral. I don't know what happened but I sent it out to be looked at
Thread
Thread Starter
Forum
Replies
Last Post
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
10-04-2015 10:52 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-07-2015 11:30 PM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2015 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)