Coil spring spacer install questions
#17
Senior Member
Join Date: Oct 2009
Location: Sutton, New Hampshire
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L
I wouldn't recommend it under any circumstances. The thin metal that most hose clamps are made of wouldn't hold up the forces being put out by the spring, and you do NOT want that thing to pop on you, especially if it's when you're putting it in. I've seen wayward flying springs do some serious damage.
#18
CF Veteran
Thread Starter
Join Date: Jan 2009
Location: Northfield MN
Posts: 1,242
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1995
Model: Grand Cherokee
Engine: 5.2 v8
Anyways said I would update after today, and so far all I have gotten done is the rear. Full packs and shocks. Took a bit longer than I had planned, so I am driving around like some sort of muscle car......looks pretty ridiculous.
So the front is planned up for tomorrow, and I should have it done.
Ill post again with what worked for me, and Ill be sure to take pictures to add to the few I have of the rear.
#19
CF Veteran
Thread Starter
Join Date: Jan 2009
Location: Northfield MN
Posts: 1,242
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1995
Model: Grand Cherokee
Engine: 5.2 v8
alright spacers and stuff are on.
How the hell do I get the track bar back onto the axle, and the control arm lined up to get it back on, on the pass. side??
I have "mechanics" around but no one seems to want to give me any tips. Wow what a great college.
How the hell do I get the track bar back onto the axle, and the control arm lined up to get it back on, on the pass. side??
I have "mechanics" around but no one seems to want to give me any tips. Wow what a great college.
#21
CF Veteran
Thread Starter
Join Date: Jan 2009
Location: Northfield MN
Posts: 1,242
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1995
Model: Grand Cherokee
Engine: 5.2 v8
Alright Forget the last ?'s. A homebrew idea worked out alright. I didnt use compressors, and obviously removed the lca's and track bar. I did manage to take pics so i will hopefully toss up a writeup soon.
#22
Newbie
Join Date: Apr 2012
Location: holly ridge nc
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
From having a 3" lift and adding a 1.5 inch coil spacers and shacles is it a must to throw on a adj. Track bar aswell as a drop pitman arm?? id also relocate my brake lines ...Im trying to add up cost here. Good tips on geting those spacers in!
I just put in 3in springs and 1.5in spacers and never used a compressor. I undid the swaybar and shocks and pulled holddown clips for springs. Then dropped axle and jacked up one side as far as I could. Then removed the spring slid in the new and presto. Only took about 1.5hrs for both sides ,including taking the old out. Was pretty easy and that was my first lift.
Thread
Thread Starter
Forum
Replies
Last Post
ROCKRIDGE 4WD
Vendor Showcase
0
08-28-2015 12:28 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-27-2015 12:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)