CRANK BUT WONT START wont run after map sensor change
#1
Thread Starter
Member
Joined: Aug 2014
Posts: 101
Likes: 0
From: Metro Detroit
Year: 1995
Model: Cherokee
Engine: 4.0
CRANK BUT WONT START wont run after map sensor change
I have a jeep xj 95 country. It wild crank but it will not turn over and start. It started a few days ago I was at work letting my car warm up. My boss had me move it and it shut off. It started back up. No issues while driving home. I got it to start up once to take home. It took a few times. When it started it would go up to 1500 RPM then die. When it got turned over black smoke came out but it clears up. When it started I had a map sensor code.
So today I changed the map sensor. The code went away but not it will not turn over. Cranks but wont stay up. I'm currently changing the crankshaft position sensor but I'm having some trouble taking it off. The torx bots are way to tight so I'm going to have a shop look at that I can't take of the TPS but there is nothing wrong with the throttle. I have other codes but 12
Also when I turn the light one(not running) they are dim
So today I changed the map sensor. The code went away but not it will not turn over. Cranks but wont stay up. I'm currently changing the crankshaft position sensor but I'm having some trouble taking it off. The torx bots are way to tight so I'm going to have a shop look at that I can't take of the TPS but there is nothing wrong with the throttle. I have other codes but 12
Also when I turn the light one(not running) they are dim
Thread
Thread Starter
Forum
Replies
Last Post
Brill
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
27
02-06-2020 01:41 AM
bornofscreams
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-24-2015 03:09 PM
heatherwatt
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
08-21-2015 07:42 AM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 09:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)