Crank sensor replaced
10-22-2011 | 07:41 PM
#17
CF Veteran
Joined: Aug 2011
Posts: 10,489
Likes: 19
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
P1389 No ASD Relay Output Voltage At PCM No Z1 or Z2 voltage sensed when the auto shutdown relay is energized.
I found the above on the first page of the "sticky" for info. I did find something for that control fuse, but for a different year, there on the inner fender.
I found the above on the first page of the "sticky" for info. I did find something for that control fuse, but for a different year, there on the inner fender.
10-22-2011 | 08:24 PM
#18
Thread Starter
Newbie
Joined: Sep 2011
Posts: 17
Likes: 0
From: pz
Year: 1998
Model: Cherokee
Engine: 6cyl
actually, i took out the start engine fuse checked for power was good re inserted.
took out fuel pump relay checked and was good too re inserted and i wiggled the main fuse box and decided to try and started and it started! except now is kinda shaky and when i give it gas it back fires
did i jack up the timing with the fuses or what?
a few moments now since i did that now im trying to start and doesnt seem to wanna start again...
took out fuel pump relay checked and was good too re inserted and i wiggled the main fuse box and decided to try and started and it started! except now is kinda shaky and when i give it gas it back fires
did i jack up the timing with the fuses or what? a few moments now since i did that now im trying to start and doesnt seem to wanna start again...
Thread
Thread Starter
Forum
Replies
Last Post
GregB58
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-28-2015 09:30 AM
clark40
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-28-2015 08:11 AM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 09:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)