Crankshaft Position Sensor
#1
Junior Member
Thread Starter
Join Date: May 2011
Location: Indianapolis
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Anyone have thoughts on reliable brands?...i don't want to replace again for at least another 200,000 miles.
I drive an all stock 2001 Jeep cherokee sport 4x4...
Thanks
I drive an all stock 2001 Jeep cherokee sport 4x4...
Thanks
#3
CF Veteran
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Or, if you prefer to get it online, Morris Off-Road has the OEM CPS (Chrysler part no.: 56027866AE) for $100.
http://www.jeep4x4center.com/cranksh...6027866ae.html
http://www.jeep4x4center.com/cranksh...6027866ae.html
#5
CF Veteran
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 18 Likes
on
18 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
I just installed an Echlin from Napa in my earlier Renix Jeep. I'm sure it's fine, giving me 1/2 a volt. About $45 out the door, but pretty different than yours.
I have this below "canned' in my files. I'm hoping sometime someone will "give it a whirl"......
On YOUR CPS, I recently found this link on testing the later, OBD II CPS, which may well apply to yours. I haven't tried it, don't know anyone who has. It looks like he's verifying 1/2 a volt, (aka.5v or 500 Mil.Volts), presumably AC, (with a true RMS meter), (back-probing, with it connected), at his third (Red) wire. (not the ground, and not the 5V-DC sensor feed). I don't know what % difference I would expect from my "cheap-o-meter", as opposed to the true RMS, but it might not be much. http://www.cherokeetech.com/VBull/sh...agnosis-Videos
I have this below "canned' in my files. I'm hoping sometime someone will "give it a whirl"......
On YOUR CPS, I recently found this link on testing the later, OBD II CPS, which may well apply to yours. I haven't tried it, don't know anyone who has. It looks like he's verifying 1/2 a volt, (aka.5v or 500 Mil.Volts), presumably AC, (with a true RMS meter), (back-probing, with it connected), at his third (Red) wire. (not the ground, and not the 5V-DC sensor feed). I don't know what % difference I would expect from my "cheap-o-meter", as opposed to the true RMS, but it might not be much. http://www.cherokeetech.com/VBull/sh...agnosis-Videos
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-03-2015 11:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)