Crap rebuilt parts in auto parts stores near you
#17
No, I don't lick fish.
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
![Dunno](https://www.cherokeeforum.com/images/smilies/iono.gif)
I know they do but if a part goes bad and you need to wait to ship out the part and then wait some more to get the new part in, ****, that will tie your vehicle up for at least a week and if it's your only vehicle you are screwed. Most of the time you can find better parts for cheaper online but you have to buy them knowing you might possibly be out of a vehicle for a week.
If it was my only vehicle though, no - I wouldn't wait for parts to be shipped. That being said, for my '92, I've STILL had to wait for parts even when going to the local stores. So I made up my mind that if I'm going to wait for a part, it's going to be a good one, and on my terms.
#18
CF Veteran
Join Date: Apr 2012
Location: Wisconsin
Posts: 5,302
Likes: 0
Received 20 Likes
on
17 Posts
Model: Cherokee
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
I don't have much trouble with pumps, but the saginaw steering boxes are getting worse and worse as no new parts are available to the rebuilders. They keep recycling parts from worn units.
The life cycle goes like this:
Box wears out, gets shipped in as a core return.
Box is disassembled to it's individual parts, parts are cleaned and checked for tolerance, then placed in bins.
Boxes are re-assembled by picking parts from the bins.
Sometimes the tolerances are complimentary and you get a nice, tight box.
Other times they're additive and you get a sloppy disaster.
The tight boxes remain installed, the sloppy boxes get returned and the rebuild process starts all over.
This of course takes the least-worn parts out of inventory while returning those that are nearing their tolerance limits back to the parts bins. Every year those tolerances get worse and the chances of getting a good rebuild diminish.
It isn't uncommon lately to get boxes with the preload adjustment screwed all the way down in an attempt to get the box to tighten up and it's only going to get worse. (check that when you buy one- should be three or more threads exposed)
The life cycle goes like this:
Box wears out, gets shipped in as a core return.
Box is disassembled to it's individual parts, parts are cleaned and checked for tolerance, then placed in bins.
Boxes are re-assembled by picking parts from the bins.
Sometimes the tolerances are complimentary and you get a nice, tight box.
Other times they're additive and you get a sloppy disaster.
The tight boxes remain installed, the sloppy boxes get returned and the rebuild process starts all over.
This of course takes the least-worn parts out of inventory while returning those that are nearing their tolerance limits back to the parts bins. Every year those tolerances get worse and the chances of getting a good rebuild diminish.
It isn't uncommon lately to get boxes with the preload adjustment screwed all the way down in an attempt to get the box to tighten up and it's only going to get worse. (check that when you buy one- should be three or more threads exposed)
Last edited by Radi; 07-26-2016 at 12:59 AM.
#19
CF Veteran
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
I don't have much trouble with pumps, but the saginaw steering boxes are getting worse and worse as no new parts are available to the rebuilders. They keep recycling parts from worn units.
The life cycle goes like this:
Box wears out, gets shipped in as a core return.
Box is disassembled to it's individual parts, parts are cleaned and checked for tolerance, then placed in bins.
Boxes are re-assembled by picking parts from the bins.
Sometimes the tolerances are complimentary and you get a nice, tight box.
Other times they're additive and you get a sloppy disaster.
The tight boxes remain installed, the sloppy boxes get returned and the rebuild process starts all over.
This of course takes the least-worn parts out of inventory while returning those that are nearing their tolerance limits back to the parts bins. Every year those tolerances get worse and the chances of getting a good rebuild diminish.
It isn't uncommon lately to get boxes with the preload adjustment screwed all the way down in an attempt to get the box to tighten up and it's only going to get worse. (check that when you buy one- should be three or more threads exposed)
The life cycle goes like this:
Box wears out, gets shipped in as a core return.
Box is disassembled to it's individual parts, parts are cleaned and checked for tolerance, then placed in bins.
Boxes are re-assembled by picking parts from the bins.
Sometimes the tolerances are complimentary and you get a nice, tight box.
Other times they're additive and you get a sloppy disaster.
The tight boxes remain installed, the sloppy boxes get returned and the rebuild process starts all over.
This of course takes the least-worn parts out of inventory while returning those that are nearing their tolerance limits back to the parts bins. Every year those tolerances get worse and the chances of getting a good rebuild diminish.
It isn't uncommon lately to get boxes with the preload adjustment screwed all the way down in an attempt to get the box to tighten up and it's only going to get worse. (check that when you buy one- should be three or more threads exposed)
#20
No, I don't lick fish.
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
I don't have much trouble with pumps, but the saginaw steering boxes are getting worse and worse as no new parts are available to the rebuilders. They keep recycling parts from worn units.
The life cycle goes like this:
Box wears out, gets shipped in as a core return.
Box is disassembled to it's individual parts, parts are cleaned and checked for tolerance, then placed in bins.
Boxes are re-assembled by picking parts from the bins.
Sometimes the tolerances are complimentary and you get a nice, tight box.
Other times they're additive and you get a sloppy disaster.
The tight boxes remain installed, the sloppy boxes get returned and the rebuild process starts all over.
This of course takes the least-worn parts out of inventory while returning those that are nearing their tolerance limits back to the parts bins. Every year those tolerances get worse and the chances of getting a good rebuild diminish.
It isn't uncommon lately to get boxes with the preload adjustment screwed all the way down in an attempt to get the box to tighten up and it's only going to get worse. (check that when you buy one- should be three or more threads exposed)
The life cycle goes like this:
Box wears out, gets shipped in as a core return.
Box is disassembled to it's individual parts, parts are cleaned and checked for tolerance, then placed in bins.
Boxes are re-assembled by picking parts from the bins.
Sometimes the tolerances are complimentary and you get a nice, tight box.
Other times they're additive and you get a sloppy disaster.
The tight boxes remain installed, the sloppy boxes get returned and the rebuild process starts all over.
This of course takes the least-worn parts out of inventory while returning those that are nearing their tolerance limits back to the parts bins. Every year those tolerances get worse and the chances of getting a good rebuild diminish.
It isn't uncommon lately to get boxes with the preload adjustment screwed all the way down in an attempt to get the box to tighten up and it's only going to get worse. (check that when you buy one- should be three or more threads exposed)
![Icon Rolleyes](https://www.cherokeeforum.com/images/smilies/icon_rolleyes.gif)
#21
Member
Thread Starter
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
And while I'm typing this, plus your thought on lines, you might be one to something. I'll R&R the lines at the slightest sign of soft spots or maybe just replace because of age.. It's 24 years and 170K old.
Thanks for the tip!
![Cool2](https://www.cherokeeforum.com/images/smilies/cool2.gif)
#22
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 29 Likes
on
28 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
A1 Cardone sucks. After my second pump went to local u pull got used factory pump still going strong after 5 year. I shop by part number of quality part even at auto parts. ACDELCO 36P1489
Last edited by freegdr; 07-27-2016 at 05:50 AM.
#23
CF Veteran
Join Date: Jun 2011
Location: Louisville,KY
Posts: 8,014
Likes: 0
Received 16 Likes
on
16 Posts
Model: Cherokee
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Years ago i tried the autozone cheapo stuff with the lifetime warranty,Well found out you spend a lifetime replacing the part over and over.I gave up bought better parts and never had to replace something that failed over and over.Now i have gone so **** i look for rebuild kits online and rather rebuild a alt or starter vs replacing it.Its cheaper and i know it was built right if not i can only blame me.
#24
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 29 Likes
on
28 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Years ago i tried the autozone cheapo stuff with the lifetime warranty,Well found out you spend a lifetime replacing the part over and over.I gave up bought better parts and never had to replace something that failed over and over.Now i have gone so **** i look for rebuild kits online and rather rebuild a alt or starter vs replacing it.Its cheaper and i know it was built right if not i can only blame me.
#25
Member
Thread Starter
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Years ago i tried the autozone cheapo stuff with the lifetime warranty,Well found out you spend a lifetime replacing the part over and over.I gave up bought better parts and never had to replace something that failed over and over.Now i have gone so **** i look for rebuild kits online and rather rebuild a alt or starter vs replacing it.Its cheaper and i know it was built right if not i can only blame me.
Heading to the stealership for new parts today
#26
Member
Thread Starter
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
End of story (or kinda)
Picked up a box and pump from NAPA. First start and test drive all is well.
They say that the Cardone rebuilder supplies them as well as AZ.
I say give me my money back AZ, you struck out with 3 bad boxes in a row.
Having the discussion with the AZ store manager tomorrow.
Picked up a box and pump from NAPA. First start and test drive all is well.
They say that the Cardone rebuilder supplies them as well as AZ.
I say give me my money back AZ, you struck out with 3 bad boxes in a row.
Having the discussion with the AZ store manager tomorrow.
#27
Old fart with a wrench
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
I should have mentioned this earlier, but the latest thing is to swap in a Dodge Durango box. They are physically larger and add one more turn to the lock-to-lock so reduce the effort.
#28
Member
Thread Starter
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
The NAPA parts are good and the AZ manager refunded my money.
Turns out the NAPA rebuilder is BBB not Cardone as originally quoted.
Happy camper once again....
Turns out the NAPA rebuilder is BBB not Cardone as originally quoted.
Happy camper once again....
![Big Grin](https://www.cherokeeforum.com/images/smilies/biggrin.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Spedley
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
02-26-2009 11:42 AM
tmannn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-29-2008 05:20 PM
muddeprived
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
10-19-2007 07:27 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)