Dana 300
11-29-2009 | 06:34 PM
#2
CF Veteran
Joined: Mar 2008
Posts: 5,902
Likes: 19
From: Kalkaska, Michigan
Year: 2001
Model: Cherokee
Engine: 4.0L
It's more work than that..
You'll need the 1" think clocking ring, Flip kit, new drive shafts and do ALOT of cutting of the floor to get the shifts in the right location..
You'll need the 1" think clocking ring, Flip kit, new drive shafts and do ALOT of cutting of the floor to get the shifts in the right location..
11-29-2009 | 07:16 PM
#4
CF Veteran
Joined: Mar 2008
Posts: 5,902
Likes: 19
From: Kalkaska, Michigan
Year: 2001
Model: Cherokee
Engine: 4.0L
Well in that case the only thing you would not need is a flip kit.
But you know you'd still need to cut the floor cause the shifter for the D300 would be on the Passenger side.
But you know you'd still need to cut the floor cause the shifter for the D300 would be on the Passenger side.
Thread
Thread Starter
Forum
Replies
Last Post
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
06-17-2023 04:57 PM
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 10:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)