Dana 60 rear full floater?
12-22-2010 | 07:12 PM
#66
Senior Member
Joined: Feb 2009
Posts: 553
Likes: 1
From: chico,ca
Year: 1989
Model: Cherokee
Engine: 4.0
just for a clearance comparison my buddy has a xj with 44 f/60 r and 35" tires and he has 9 5/8" from the ground to the bottom of his rear diff im runnin a xj d44 rear on 33's and i have 10 1/8" from the ground so i have a 1/2" more clearance with 2" smaller tires so i would say 37's would be the smallest you wanna go with those big ole honkin axles 
hope that helps some
hope that helps some
12-22-2010 | 08:39 PM
#68
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 5
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
No no no, you need rockwell's. lol
It funny this tread has went from d60 to 14b to Sterling and yes, now i'm taking it to 2.5 tons
In all seriousness, i beat on my old XJ with 35's on stock axles. I blew the front axle from the gears commoning unmeshed. bought a JY one, added a truss and kept on going. Unless your doing rock crawling with 38+ tires, whats the point of anything bigger than an 8.8?
It funny this tread has went from d60 to 14b to Sterling and yes, now i'm taking it to 2.5 tons
In all seriousness, i beat on my old XJ with 35's on stock axles. I blew the front axle from the gears commoning unmeshed. bought a JY one, added a truss and kept on going. Unless your doing rock crawling with 38+ tires, whats the point of anything bigger than an 8.8?
12-22-2010 | 08:46 PM
#70
Thread Starter
Junior Member
Joined: Jul 2010
Posts: 87
Likes: 0
From: new Jersey
Year: 2001
Model: Cherokee
Engine: I6
Well its 500 for any 2 of them like 60 rear 44 front or 9 inch rear 44 front or 14 bolt 44 front. Still too much? I thought I hit a deal lol. Cuzi hear some people pay 1000 for just one dana 60...
12-22-2010 | 08:47 PM
#71
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 5
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
http://cnj.craigslist.org/pts/2108097339.html
http://cnj.craigslist.org/pts/2099167557.html
http://cnj.craigslist.org/pts/2104768307.html
http://cnj.craigslist.org/pts/2103128896.html
http://cnj.craigslist.org/pts/2081031597.html
http://cnj.craigslist.org/pts/2072818946.html
dont say i never did nothing for ya... lol search keywords... (9in)(9 inch)(14bolt)(14 bolt)(dana 60)(dana60)(d60)
http://cnj.craigslist.org/pts/2099167557.html
http://cnj.craigslist.org/pts/2104768307.html
http://cnj.craigslist.org/pts/2103128896.html
http://cnj.craigslist.org/pts/2081031597.html
http://cnj.craigslist.org/pts/2072818946.html
dont say i never did nothing for ya... lol search keywords... (9in)(9 inch)(14bolt)(14 bolt)(dana 60)(dana60)(d60)
12-22-2010 | 09:01 PM
#74
Thread Starter
Junior Member
Joined: Jul 2010
Posts: 87
Likes: 0
From: new Jersey
Year: 2001
Model: Cherokee
Engine: I6
Originally Posted by huntingman2706217
if you can get a dana 60 FRONT alone without any rear end for $500 thats a heck of a deal... but still... thats just the start of the cost... lol
12-22-2010 | 09:49 PM
#75
Seasoned Member
Joined: Sep 2010
Posts: 325
Likes: 0
From: Portsmouth,VA
Year: 96
Model: Cherokee
Engine: 4.0 I6
Because you already mentioned to him about looking at a junkyard!!!!! So again I say... I was giving another option... forums give options... the OP desides which one is best for him... just because someone gives an option and states a fact and YOU would do something different doesn't make it wrong... again this forum in not built or intended to go by only what YOU say... u can have your opinion... I really don't care... but I'm gonna voice mine as well... if you don't like it pack up and move the hell on...
