Drag Link and Front end Suspension sourcing
#1
Junior Member
Thread Starter
Drag Link and Front end Suspension sourcing
I need to replace a number of piece on my front end - upper and lower ball joionts, tie rods, drag link, ... This is a daily driver car and sees some rough country about 2x a year for perspective.
1 Is going with a complete package a bad idea - like the following https://www.1aauto.com/jeep-cherokee...EaAjduEALw_wcB
2. Are there some more critical parts that one would say defintely buy X in heavy duty form?
I normally buy from AutoZone (AZ)
I know that is open enede but over the last 10 years I have gotten good advice from this site.
1 Is going with a complete package a bad idea - like the following https://www.1aauto.com/jeep-cherokee...EaAjduEALw_wcB
2. Are there some more critical parts that one would say defintely buy X in heavy duty form?
I normally buy from AutoZone (AZ)
I know that is open enede but over the last 10 years I have gotten good advice from this site.
#2
Seasoned Member
Join Date: May 2021
Location: Western Washington
Posts: 468
Received 90 Likes
on
77 Posts
Year: 1988
Model: Cherokee (XJ)
Engine: 4.0L
When I rebuilt my front end last year I bought some individual components and then a package, so I had some duplicate pieces. There was no difference in quality between the individual components and the package. You do save a bit of $ buying the package.
#3
CF Veteran
One thing you didn't mention is the track bar. If that other stuff is worn out, so is it
Thread
Thread Starter
Forum
Replies
Last Post
Billy Bee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
03-14-2017 10:24 AM
bigvig
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
10-10-2011 03:10 PM
Biceps McRipped
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
11-10-2010 12:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)