Driver Seat Bolts - 4 alike? Replacements?
12-09-2019, 02:22 AM
#1
Member
Thread Starter
Driver Seat Bolts - 4 alike? Replacements?
99 Jeep Cherokee Sport
Are the four bolts (studs?) that hold down the driver seat identical? Do they all screw down into threaded somethings (sockets?) in the floor? Or are there nuts under the floor holding the bolts in place? Thanks.
Are the four bolts (studs?) that hold down the driver seat identical? Do they all screw down into threaded somethings (sockets?) in the floor? Or are there nuts under the floor holding the bolts in place? Thanks.
12-09-2019, 04:25 AM
#2
CF Veteran
Join Date: Oct 2015
Posts: 7,407
Likes: 0
Received 1,555 Likes
on
1,195 Posts
Year: 2000
Model: Cherokee (XJ)
Then there is the nut in the rear by the console that screws on to the threaded stud coming up from the floor.
Bust a couple?
12-09-2019, 09:45 AM
#3
CF Veteran
Join Date: Aug 2019
Location: East Tennessee
Posts: 1,579
Received 217 Likes
on
185 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 242 cui
If it is like my 1996 XJ, and a newer Grand Cherokee I got a donor seat from, all FOUR studs are the same. M8(?) with 13mm nuts on each.
These hold the seat assembly to the floor mounts.
These hold the seat assembly to the floor mounts.
12-09-2019, 09:48 AM
#4
CF Veteran
Join Date: Oct 2015
Posts: 7,407
Likes: 0
Received 1,555 Likes
on
1,195 Posts
Year: 2000
Model: Cherokee (XJ)
I thought he was asking about how the base was attached to floor.
The following users liked this post:
318SixPack (12-09-2019)
12-09-2019, 02:27 PM
#6
Seasoned Member
Yeah I thought the same thing until I pulled the carpet
Just pull the carpet to be sure and toss all that insulation crap, hit the floor with a wire wheel and do some further investigation. If all good, repaint and put back the carpet if you desire. I just left it without a carpet for now.
12-09-2019, 06:14 PM
#7
Senior Member
looking from behind the seat, on the driver side, the right rear has a fixed stud in the floor. the other three I believe take a 13mmsocket. . The front two bolts go through a frame type affair. The other rear goes through the floor. If you replace this one make sure you put a plate under the vehicle to reinforce things. it's pretty much the same on the passenger side.
The following users liked this post:
318SixPack (12-09-2019)
Thread
Thread Starter
Forum
Replies
Last Post
dangercraft
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
25
06-13-2022 01:16 PM
CNTLOSE
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
04-02-2011 03:32 PM
1989cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
07-14-2009 12:02 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)