Electrical harness to alt -99
07-03-2015, 01:32 PM
#1
Member
Thread Starter
Join Date: Apr 2014
Location: Ohio
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Electrical harness to alt -99
At least I'm consistent. Always the electrical connectirs that trip me up. Alt all unbolted and ready to come out. Being held up with a bungee so I can remove this clip. View from top- got it turned as far as it'll go to work on it. I found what I believe to be the tab (tip of screw driver in pic). Tried a little wd40 and pushing tab then gently prying it away. No luck. Which way does it go pls? Thanks! 
07-03-2015, 01:57 PM
#3
Member
Thread Starter
Join Date: Apr 2014
Location: Ohio
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Poop. Follow up question. This is what the connector looks like. Gunked up with white-ish biz. Is it ok to shoot this female side with elec cleaner or do I need to be doing something different? Thanks in advance for advice and patience
07-03-2015, 02:38 PM
#4
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 84 Likes
on
69 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Clean it out using CRC QD Electronic Cleaner. Agitate with a paint brush, or acid brush, if required.
Some d' bag used Dielectric grease or something in there.
Some d' bag used Dielectric grease or something in there.
Thread
Thread Starter
Forum
Replies
Last Post
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
53
04-30-2021 02:35 PM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 08:09 PM
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
10-03-2015 05:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)