Embarrassing question
#1
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 73
Likes: 0
From: Bonner Springs
Year: 2000
Model: Cherokee
Engine: 4.0
Embarrassing question
Okay, so this is a pretty embarrassing question to have to ask, but I have done my searching and because the answer is so simple I cannot find it:
How do I turn my headlights to hi beam / brights in my 1987 Jeep Cherokee XJ?
How do I turn my headlights to hi beam / brights in my 1987 Jeep Cherokee XJ?
#3
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 73
Likes: 0
From: Bonner Springs
Year: 2000
Model: Cherokee
Engine: 4.0
Any other methods? Perhaps a work around to activate them if the turn signal bar is the general method?
#4
Clap twice...
JK, but yeah, try the obvious, pull back on the turn signal stalk, try pushing forward on it.
Also, like Troy Fritz said, there might be a small round button on the floor so you could hit it with your left foot. It may or may not be under the carpet...
meh, just saw your second post...
Look for any switches or weird out of place wires...
If you, might wanna go buy a 3 way switch and some wire. an on-off-momentary switch is ideal...
JK, but yeah, try the obvious, pull back on the turn signal stalk, try pushing forward on it.
Also, like Troy Fritz said, there might be a small round button on the floor so you could hit it with your left foot. It may or may not be under the carpet...
meh, just saw your second post...
Look for any switches or weird out of place wires...
If you, might wanna go buy a 3 way switch and some wire. an on-off-momentary switch is ideal...
Last edited by nasonguy; 10-23-2009 at 12:36 PM.
#5
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 73
Likes: 0
From: Bonner Springs
Year: 2000
Model: Cherokee
Engine: 4.0
No carpet in this bad boy. I ripped that nasty stuff out when I bought it and put some Herculiner truck bed liner on the floor pans. I'll snap some photos of it and post some pics so everyone has a better idea of what I'm dealing with.
Last edited by kansas_jeeping; 10-23-2009 at 12:45 PM.
Trending Topics
#8
Renix Super Guru
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
My guess after seeing those pics are that he broke something in that column. Cheapest and easiest would be to put a J/Y column in it. Sorry you are not here as I have a spare column. (grey, tilt)
#9
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 73
Likes: 0
From: Bonner Springs
Year: 2000
Model: Cherokee
Engine: 4.0
#12
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 73
Likes: 0
From: Bonner Springs
Year: 2000
Model: Cherokee
Engine: 4.0
See that little metal bar? That's how I have to start the Jeep. Pull it back towards me until if fires up then let it go. Push it towards the dash to kill it. It's pretty ghetto but it still works and it was only $1500. Lotta life left in it for $1500!
#13
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 73
Likes: 0
From: Bonner Springs
Year: 2000
Model: Cherokee
Engine: 4.0
#15
Junior Member
Joined: Oct 2009
Posts: 93
Likes: 0
From: MIAMI, FL
Year: 1993
Model: Cherokee
Engine: 4.0 I6
Im not really sure i couldn't come up with a price either, and as far as starting with that upper actuator ( i believe thats what its called) good luck DIYing that yourself. i'm not sure how similar that is to ford but in my old truck that was the biggest pain in tha butt ever.