Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Engine Idle Hiccup

Thread Tools
 
Search this Thread
 
Old 03-28-2019, 03:44 PM
  #16  
Member
 
JK253's Avatar
 
Join Date: Apr 2012
Location: Puyallup, WA
Posts: 246
Likes: 0
Received 10 Likes on 9 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0L
Default

I had something similar with my '99, turned out a very small portion of one of the plug wire ends was exposed below the boot and arcing over to the block, so not all of the juice was making it to the plug. Not sure if 2000-2001 can have a similar issue with the coil rail setup, but check for any exposure along the connections.
Old 03-29-2019, 10:44 AM
  #17  
Junior Member
Thread Starter
 
Big_Taxi's Avatar
 
Join Date: Mar 2019
Location: Ithaca, NY
Posts: 44
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by JK253
I had something similar with my '99, turned out a very small portion of one of the plug wire ends was exposed below the boot and arcing over to the block, so not all of the juice was making it to the plug. Not sure if 2000-2001 can have a similar issue with the coil rail setup, but check for any exposure along the connections.
Good to know. I actually pulled the code and it was a cylinder 4 misfire... which is odd, because I've had misfires on other cars and it was MUCH more pronounced. I decided to pull the trigger on new plugs and wiring, because I couldn't track down the last time they were replaced. When I swap them out, I'll check for any odd/poor connections. I'll be doing the swap tomorrow afternoon, weather pending. Any advice on putting in new spark plugs?
Old 03-29-2019, 10:49 AM
  #18  
CF Veteran
 
PatHenry's Avatar
 
Join Date: Nov 2017
Location: Groton, MA
Posts: 3,700
Received 236 Likes on 209 Posts
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
Default

Originally Posted by Big_Taxi
Good to know. I actually pulled the code and it was a cylinder 4 misfire... which is odd, because I've had misfires on other cars and it was MUCH more pronounced. I decided to pull the trigger on new plugs and wiring, because I couldn't track down the last time they were replaced. When I swap them out, I'll check for any odd/poor connections. I'll be doing the swap tomorrow afternoon, weather pending. Any advice on putting in new spark plugs?
Champion copper or NGK copper plugs, proper gap, take care doing the plug R&R so you don't break the plug or strip the threads, start the new plugs by hand (or use a piece of hose) so you don't cross-thread them.. standard stuff. I don't recall any trouble or difficulty.
Old 03-29-2019, 11:02 AM
  #19  
CF Veteran
 
Dave51's Avatar
 
Join Date: Jan 2017
Location: Connecticut
Posts: 3,287
Received 372 Likes on 332 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by Big_Taxi
Any advice on putting in new spark plugs?
Blow out all the debris around the plug before you take them out to avoid sand etc. from falling into the cylinder. They may have been in there a LONG time so take preventative steps like a 6-point socket. At least loosen them while the engine is hot. Consider some PB beforehand.
Old 03-29-2019, 11:04 AM
  #20  
CF Veteran
 
Dave51's Avatar
 
Join Date: Jan 2017
Location: Connecticut
Posts: 3,287
Received 372 Likes on 332 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default

And put some anti-seize on the new ones if they don't come with something already.
Old 04-03-2019, 08:51 AM
  #21  
Junior Member
Thread Starter
 
Big_Taxi's Avatar
 
Join Date: Mar 2019
Location: Ithaca, NY
Posts: 44
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default

I swapped out my spark plugs on a chilly Sunday afternoon, and lo and behold the ones I pulled from the engine were incredibly burnt out. I swapped in the new ones and started him up, and hey presto, my hiccup is a fraction of what it once was, to basically being unnoticeable. It still seems a little sluggish and I'm worried about pushing the engine too hard (I tightened all the plugs pretty good but am still cautious).

Thanks for everyone's help, I think this solved the problem. my one issue is the distributor coil didn't seem to seat all the way back on, even though it clearly is. If you look underneath the distributor you can see that actual ceramic of the spark plugs between the rubber and the engine block... something I should be worried about? The car runs fine though, much smoother. I just wish it didn't feel quite so sluggish sometimes, and I can sense like a 5-15% hiccup occasionally of what I had.

Edit: I do actually have a small problem where now my temperature gauge only works about 1/3 of the time. Did I jostle something when I swapped the plugs?

Last edited by Big_Taxi; 04-03-2019 at 09:48 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OldLaredo
Cherokee Chat
1
07-15-2014 01:13 PM
jeepguy93
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
42
10-15-2012 04:22 PM
redrocket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-24-2011 08:13 AM
88GTBlack
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
03-13-2010 09:16 AM
88GTBlack
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
03-08-2010 03:14 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Engine Idle Hiccup



All times are GMT -5. The time now is 02:21 AM.