Exhaust on a I6?
#1
Newbie
Thread Starter
Join Date: Mar 2009
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Exhaust on a I6?
Anybody toy around with types of exhaust on the I6 for increased HP?
Does the I6 require back pressure from the cat or would removing it add a few HP?
Would Flowmaster or straightpiping add HP?
Does the I6 require back pressure from the cat or would removing it add a few HP?
Would Flowmaster or straightpiping add HP?
#2
MJ>XJ
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
i pulled the exhaust bolts off from in front of my cat and moved it down and rebolted it so its all still there but it just comes out right before the cat instead... just to play with it... actually doesnt sound that bad but its loud as crap... lol... it probly helped my HP but i cant tell... nobody probly will tell the difference in just exhaust... only on the dyno really... my cats busted so its probly better... got a single chamber muffler im gonna stick on it once i get it back on the road... just to see... lol
#3
Senior Member
Join Date: Feb 2009
Location: Highlands Ranch Co.
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1985 shell
Model: Cherokee
Engine: 1996 6 cylinder Briggs & Stratton
4.0 engines perform better with some back pressure unless you build a stroker and are planning to run 5k plus rpms. 2.5 inch pipe is pretty much as big as you want to go if you want to maintain the the low rpm grunt that these motors are known for! taking off the cat is wrong and can get you a ticket! Shop around for a cat back system---
#4
Seasoned Member
Join Date: Jan 2009
Location: FLORIDA
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: I-6
without a cat will be fine, the muffler provides enough back pressure.. Gives more pep, sounds cool too.. I have a gibson and it rox!
#6
Senior Member
Join Date: Jan 2009
Location: Redford MI
Posts: 836
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Grand Cherokee
Engine: 4.0
I cut the cat off on my YJ and it seemed to give it a little more power, also used a three chamber flowmaster. On my XJ I've kept the cat and have a Hooker "aero chamber" muffler on it. The exhaust is tucked up high and dumped at rear axle. Sounds good. Dont think it has changed much power wise.
Trending Topics
#9
CF Veteran
Join Date: Oct 2008
Location: Hell, CA
Posts: 2,127
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L I6
You can run without cat**, but depending on year you might get codes and/or run rich. I would recommend replacing with a new high-flow cat and runnig straight pipe as far back as you want to go. I guess it all depends on how loud you want it.
**note, running without a cat is illegal unless it is strictly an off-road vehicle. Figured I would say it nicely before someone else does..
**note, running without a cat is illegal unless it is strictly an off-road vehicle. Figured I would say it nicely before someone else does..
#10
CF Veteran
Join Date: Feb 2009
Location: Ohio
Posts: 1,184
Likes: 0
Received 4 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 1995 ZJ 4.0
You can run without cat**, but depending on year you might get codes and/or run rich. I would recommend replacing with a new high-flow cat and runnig straight pipe as far back as you want to go. I guess it all depends on how loud you want it.
**note, running without a cat is illegal unless it is strictly an off-road vehicle. Figured I would say it nicely before someone else does..
**note, running without a cat is illegal unless it is strictly an off-road vehicle. Figured I would say it nicely before someone else does..
#11
CF Veteran
Join Date: Nov 2008
Location: Paso Robles Ca
Posts: 2,473
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
4.0 engines perform better with some back pressure unless you build a stroker and are planning to run 5k plus rpms. 2.5 inch pipe is pretty much as big as you want to go if you want to maintain the the low rpm grunt that these motors are known for! taking off the cat is wrong and can get you a ticket! Shop around for a cat back system---
#13
CF Veteran
Join Date: Feb 2009
Location: Ohio
Posts: 1,184
Likes: 0
Received 4 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 1995 ZJ 4.0
I'm with you I have been building street/strip drag cars and off-road trucks for a long time and I believe the whole back pressure thing is B.S. I have read a hundred articles and charts for one way or the other and it just doesn't make that big of a deal to worry about. just like being able to feel a 5-HP gain. It's all in your head
Last edited by bigbadxj; 04-05-2009 at 10:57 AM.
#14
Senior Member
Join Date: Feb 2009
Location: Highlands Ranch Co.
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1985 shell
Model: Cherokee
Engine: 1996 6 cylinder Briggs & Stratton
Taking off the cat is still the wrong thing to do, if he has an upstream o2 sensor and a down stream o2 sensor the computer will run in default mode without the cat. Not the way to run any engine for any period of time. Cats are not a punishment they serve a positive purpose by reducing pollution! High flow cats are the option to go with if you want more flow.I dont think that i have all the answers, i just believe that everyone should be responsible for what they do........
#15
CF Veteran
Join Date: Nov 2008
Location: Paso Robles Ca
Posts: 2,473
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
I'm with you I have been building street/strip drag cars and off-road trucks for a long time and I believe the whole back pressure thing is B.S. I have read a hundred articles and charts for one way or the other and it just doesn't make that big of a deal to worry about. just like being able to feel a 5-HP gain. It's all in your head
overlap
but on a comp controlled motor you want no back pressure
but you can still over size the egsost and ruin the scavenging effect
I think you should run a cat just get a hi flow one