Acidburn2448

I easily got it done in 2 hours today. It's very simple to do. Used reciprocating saw on cat because it was pinched around header pipe then used a grinder to cut and knock off excess then cut again from tailpipe to muff and dropped that piece out. Clamped the flowmaster delta 40 to the magnaflow cat and found a piece of pipe. Tac welded it first and hammered it down flat and then sealed it up really well with a slow bead of welding. Clamped it all in and it was good to go. It drones at 1700-1900 but it's actually rather quiet at 70-85 on the highway. I couldn't hear it in the car. Thanks for everyones help.