Flipped Jeep, now...?
#16
CF Veteran
Join Date: May 2012
Location: Wilmington,NC
Posts: 3,004
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
Lol IK what you meen I flipped mine it sat on her roof for 2 hours and ran for a min or two while it was on its roof (oops) all I did was drop some trans fluid in her and fired her off then she shut down almost instantly found out a relay had shorted out from the water I flipped it in. Replaces that fired her off popped the roof out and been driving the F*ck out of her ever since gotta love an XJ.
#17
CF Veteran
Thread Starter
Definitely true. Can't worry too much about hurting it now, there's tons of small-medium dents on it now lol. On a side note, flipping my Jeep over finally got me the trans fluid change I've been putting off
#21
Former Sponsor
Join Date: Feb 2010
Location: Hesperia
Posts: 2,021
Likes: 0
Received 1 Like
on
1 Post
Year: 89
Model: Cherokee
Engine: 4.0
^ a mallet, hammer, or bottle jack with some sort of extension... anything that will push it back. It will never look the same as you'll most likely have a crease there where the metal folded.
OP- are you going to put a cage in it? You really made out on that one, I think it got more dents yesterday making a new trail than you did rolling
OP- are you going to put a cage in it? You really made out on that one, I think it got more dents yesterday making a new trail than you did rolling
#22
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 15 Likes
on
15 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Considering its a roll over your lucky at what damage you have. I also owned 3 towing companies in the Denver, CO. area and have see a lot of them.
One thing you should look at are the differentials they may have drained out some gear oil through the vent tubes some while upside down.
One thing you should look at are the differentials they may have drained out some gear oil through the vent tubes some while upside down.
Thread
Thread Starter
Forum
Replies
Last Post
StPTrucker
Introductions
30
11-22-2015 05:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)