Frustrated with poly bushings on UCA!!
02-11-2011 | 04:26 PM
#1
Thread Starter
Junior Member
Joined: Sep 2010
Posts: 99
Likes: 0
From: So-Cal
Year: 2001
Model: Cherokee
Engine: 244 c.i.
Frustrated with poly bushings on UCA!!
So I put in the new poly bushings after burning out the old ones. Now the eyes on the new polys are too big for the stock bolts. So now I bought new bolts that fit perfect but are too big for the frame!
I don't wanna drill bigger holes on the frame 'cause when I get a lift with new adjustable UCA, I don't want to find out the holes are now too big on the frame.Is it ok to have a little play if I was to use the stock bolts on the new polys??
02-11-2011 | 10:29 PM
#4
Seasoned Member
Joined: Dec 2010
Posts: 345
Likes: 1
From: So. California
Year: 1991
Model: Cherokee
Engine: 4.0 HO
Just pick up or make some inner sleeves for the urethane bushings that are the correct OD for the bushings and the correct ID for you stock bolts. Shouldn't be too hard!
02-11-2011 | 10:54 PM
#5
Thread Starter
Junior Member
Joined: Sep 2010
Posts: 99
Likes: 0
From: So-Cal
Year: 2001
Model: Cherokee
Engine: 244 c.i.
Yup. It all came with the inner sleeves which seem too big for the stock bolts. There's a little play with the bolts. I'm kinda lost on what to do.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
05-05-2024 12:21 PM
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-02-2015 08:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)