So in the process of replacing the switch I unplugged the wiring from the switch and I find this on one plug would you think that's my whole problem and I should just fix that connector or would the switch be hurt to

 

PROBLEM SOLVED!!!!! I replaced the switch and pulled the connector out of the plug that was hurt and scraped and cleaned up the connection real good and plugged it back in everything works perfect now with no jumper in place thanks FREEGDR for all your help

 

Bingo That plug needs to be replaced deff no if and or buts.....https://www.google.com/?ion=1&espv=2...ector&tbm=shop

 

I pulled the connector out of the plug and cleaned it up good and fixed it so it wouldn't come back out I think it will be alright

 

Post a picture of it on new thread let forum members decide..Its gonna come back too haunt you. Over heating caused that it will happen again and possible fire hazzard.

 

Yeah ill just replace that harness and be done the next weekend I get free

 

There ya go. And welcome to the rorum.