Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Lighting Guides
- Jeep Cherokee XJ 1984 to 1996 How to Replace Your Headlights and Fog lights
Step by step instructions for do-it-yourself repairs
Browse all: Lighting Guides
Headlight Upgrades
#227
Junior Member
Join Date: Jun 2011
Location: NoVA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Just installed my upgrade after the flicker problem. Putco harness, Rampage housings, Silverstar bulbs. As everyone else has stated, the difference over stock is amazing.
The only issue right now is my lights won't turn off until I put the transmission into Park. Any ideas why? I filed/sanded the paint off where the ground wires attached. I do not have factory fogs ('99 Classic). 3-prong male from Putco harness connected into the factory passenger side plug, driver side factory plug stayed disconnected.
The only issue right now is my lights won't turn off until I put the transmission into Park. Any ideas why? I filed/sanded the paint off where the ground wires attached. I do not have factory fogs ('99 Classic). 3-prong male from Putco harness connected into the factory passenger side plug, driver side factory plug stayed disconnected.
#228
::CF Moderator::
Thread Starter
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Just installed my upgrade after the flicker problem. Putco harness, Rampage housings, Silverstar bulbs. As everyone else has stated, the difference over stock is amazing.
The only issue right now is my lights won't turn off until I put the transmission into Park. Any ideas why? I filed/sanded the paint off where the ground wires attached. I do not have factory fogs ('99 Classic). 3-prong male from Putco harness connected into the factory passenger side plug, driver side factory plug stayed disconnected.
The only issue right now is my lights won't turn off until I put the transmission into Park. Any ideas why? I filed/sanded the paint off where the ground wires attached. I do not have factory fogs ('99 Classic). 3-prong male from Putco harness connected into the factory passenger side plug, driver side factory plug stayed disconnected.
#230
::CF Moderator::
Thread Starter
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#231
Junior Member
Join Date: Jun 2011
Location: NoVA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
#232
::CF Moderator::
Thread Starter
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#235
::CF Moderator::
Thread Starter
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#236
Junior Member
Join Date: Nov 2011
Location: Wernersville, PA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
I did the harness upgrade today! Got it from LMC Truck. Took about an hour to do but let me tell ya best time and money spent! Even with the sealed beam lights!
#238
::CF Moderator::
Thread Starter
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#240
Junior Member
Join Date: Nov 2011
Location: Wernersville, PA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Just took harness back out. When turning headlight on caused whole dash to go black, radio off and amp gauge pegged at 18 with check gauges light on. Also when shutting off engine would cut all power and be totally dead. Took out, went back to factory wiring no issues except crappy lights. Oh well I tried!