Heater control valve ?
#1
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 87
Likes: 0
From: Ramona,CA
Year: 1991
Model: Cherokee
Engine: 4.0
Heater control valve ?
Hey guys the vacuum to my HCV is not working. I know it is there for a reason, but has anyone removed the HCV. It would be alot easier than tearing up the dash to figure out the vacuum issue. Any input would be appreciated.
Thanks Brendan
Thanks Brendan
#3
Senior Member
Joined: Mar 2010
Posts: 812
Likes: 1
From: Eugene, OR
Year: 1989
Model: Cherokee
Engine: 4.7 Stroker I6
is that the thing under the hood over by the trans and oil dip that has 2 coolant hoses going to it and a vacuum hose on the other end? if it is mine looks like hell and I would like to take it out also, when I was changing the spark plugs I noticed the vacuum line wasnt even hooked up to it.
#5
Senior Member
Joined: Mar 2010
Posts: 812
Likes: 1
From: Eugene, OR
Year: 1989
Model: Cherokee
Engine: 4.7 Stroker I6
Hello? I'd still like to know if the HCV is the thing I described above so I can remove it. What is it supposed to do anyway? Sense when the coolant is hot and only turn on the heater then or something? Mine obviously wasnt doing anything since the vacuum line was off of it.
#6
Hello? I'd still like to know if the HCV is the thing I described above so I can remove it. What is it supposed to do anyway? Sense when the coolant is hot and only turn on the heater then or something? Mine obviously wasnt doing anything since the vacuum line was off of it.
yes it has four coolant lines and a vac line
Thread
Thread Starter
Forum
Replies
Last Post
CAT_Tech2
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
67
09-18-2015 09:26 AM
DWStiles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
09-18-2015 07:10 AM
HappyTrails
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
09-14-2015 09:54 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 11:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)