help with 4.5 lft and 35s?
#31
Seasoned Member
Thread Starter
Join Date: Dec 2008
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
so 17s it is then probly. i wanna see a pic first tho. And i started hearing like a whistle sound coming from the back of the engine/exuast any ideas guys. Im totally lost on it
#32
CF Veteran
Join Date: Apr 2008
Location: Burlington, NC
Posts: 2,340
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1994...mostly...
Model: Cherokee (XJ)
Engine: 4.0L I6 HO, Lot's of Bolt Ons
Could be an exhuast leak, the headers are know to crack right before attaching to the down pipe. IF you look down between the motor and the master cylinder you can see about where it would be on the exhuast.
Also here's the pics I was talking about.
So add 1" to the bottom of the rim due to an increase in rim size. So you have a radius of 7.5 vs 8.5 add that to the 3" of tire and it gives you a total of 10.5" of ground clearance vs 11.5"
Also here's the pics I was talking about.
So add 1" to the bottom of the rim due to an increase in rim size. So you have a radius of 7.5 vs 8.5 add that to the 3" of tire and it gives you a total of 10.5" of ground clearance vs 11.5"
Last edited by Desertfox1023; 12-17-2008 at 04:28 PM.
#34
CF Veteran
Join Date: Apr 2008
Location: Burlington, NC
Posts: 2,340
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1994...mostly...
Model: Cherokee (XJ)
Engine: 4.0L I6 HO, Lot's of Bolt Ons
Yes that would be zero psi. The point is to show added clearance due to the increased rim size. A 35 aired down would be like a 33, the tires shown are like a 29 or something prior to being inflated.
#38
Seasoned Member
Thread Starter
Join Date: Dec 2008
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
ok fixed the leak in the exhuast, lost a bolt. ok has anybody fit 35s on the back by cutting if out yourself. I know theres a weld that you will have to cut if the tires are to big. Just trying to see if i will have to do that of not. help??
#40
Seasoned Member
Join Date: Dec 2008
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L renix
^are you talking about doing coils for the rear also?
there are kits out there to do it but its not really that much better than a nice flexy set of leaves and a properly setup shackle
there are kits out there to do it but its not really that much better than a nice flexy set of leaves and a properly setup shackle
#41
Seasoned Member
Thread Starter
Join Date: Dec 2008
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
yeah i have been hearing there is alot of movement and vibration with the coils on the back, ive been trying to read everything i can about a 4.5lift with 35s and cant find any info about cutting the back fenders
#45
Seasoned Member
Thread Starter
Join Date: Dec 2008
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
yea i know what you have to do to put coils on but i just hear there is alot of problems with vibrations and flexing with the coils